TomP Posted August 28, 2017 Share Posted August 28, 2017 Did Dodge change the shut line Cowl to Hood, I am aware that Plymouth did on the car range but what about Dodge? Link to comment Share on other sites More sharing options...
Spinneyhill Posted September 1, 2017 Share Posted September 1, 2017 On 8/29/2017 at 6:38 AM, TomP said: Did Dodge change the shut line Cowl to Hood OK, I'll bight. What is a "shut line"? 1 Link to comment Share on other sites More sharing options...
jpage Posted September 1, 2017 Share Posted September 1, 2017 I think he may be talking about the contour lines where the hood meets the cowling.Now if he's comparing different years, he should be a little more specific. Link to comment Share on other sites More sharing options...
TomP Posted September 2, 2017 Author Share Posted September 2, 2017 I have a 33 PD and a 34 PE the hood doors are at the same angle but the contour across the top of the hood is completely different, to be exact the 33 at the center is 1 1/4" shallower at the center. As Dodge and Pymouth used the same bodies? did Dodge also change the top contour for 1934. Throughout the automotive bodywork trade where 2 panels meet the gap is called The Shut Line. Link to comment Share on other sites More sharing options...
Spinneyhill Posted September 8, 2017 Share Posted September 8, 2017 The gap = shut line, but is the profile or shape, which you refer to in the last post, also the shut line? I think we are all confused about what you are asking. Try layman's terms - I am not in the body trade and really can't figure what you are asking. Or why. Are you asking if they used the same hood? Or the same cowl? or ? Link to comment Share on other sites More sharing options...
TomP Posted September 10, 2017 Author Share Posted September 10, 2017 I will post a couple of photos tomorrow. Thank you Link to comment Share on other sites More sharing options...
TomP Posted September 11, 2017 Author Share Posted September 11, 2017 (edited) Photo1/2 PD/PE Hood doors Photo3 PD Hood Top under the PE , now what I am asking is did Dodge make the same profile change in 1934 and was it both the cars and commercials. The straight edge parallel to the bottom of the photo is the center hinge joint Thanks for looking. Edited September 11, 2017 by TomP (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now