carmover Posted December 12, 2016 Share Posted December 12, 2016 I have a Buick Spark Plug Cover That apparently fits a 1920 and possibly more years.I looked at Terry Wiegand's 1920 Buick engine picture and it is the same one that I have.It is in good condition but will need to be painted and it has the 2 knobs that holds it on I need to sell if someone needs one.I paid $100.00 plus shipping and I just want to get my money back. 1 Link to comment Share on other sites More sharing options...
27donb Posted December 13, 2016 Share Posted December 13, 2016 Could you post a picture of the front and back? Link to comment Share on other sites More sharing options...
carmover Posted December 13, 2016 Author Share Posted December 13, 2016 (edited) Quote 27donb,Here are the pictures you requested.They are in real good shape but will need refinishing Edited December 13, 2016 by carmover posting pictures (see edit history) Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted December 13, 2016 Share Posted December 13, 2016 Here is the original Ebay posting which has some good pictures. Hugh http://www.ebay.com/itm/1925-Buick-Spark-Plug-Cover-With-Retainers-/262683578104?hash=item3d29294ef8%3Ag%3AEIUAAOSwnbZYCRBB&vxp=mtr&nma=true&si=8%2B1iEY6zV%2BhLVtWXE4k8Tpwy1Xo%3D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557 Link to comment Share on other sites More sharing options...
carmover Posted December 13, 2016 Author Share Posted December 13, 2016 Quote 27donb,I tried to put the pictures on here and it wouldn't let me.I think the resolution is too large for this site and I just bought a new camera and am going to have to study up on it. Link to comment Share on other sites More sharing options...
carmover Posted December 13, 2016 Author Share Posted December 13, 2016 (edited) Thanks Hugh,Laying down like they were on facebook it was hard to see the demensions .They are twice as wide as the 25 cover and the holes don't match up to a 25.Terry Wiegand sent me some pictures of his 20 coupe and it had a good closeup shot of the spark plug cover and it looks like this one Edited December 13, 2016 by carmover (see edit history) Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted December 13, 2016 Share Posted December 13, 2016 Ron, perhaps you can state the height and width of the cover so that people know if it is for a 4 or 6 cylinder. Thank you Hugh Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted December 13, 2016 Share Posted December 13, 2016 From the Ebay file. Link to comment Share on other sites More sharing options...
carmover Posted December 13, 2016 Author Share Posted December 13, 2016 (edited) Hugh its for a 6 it is the same length as a 25 6 but the 25 width is 31/2 and this one measures 53/4.Also the bolt holes on the 25 is 181/4 center to center this one measures 191/2 center to center.Here is a 25 cover and a 20 cover for comparison.Another thing the 20 cover has the bottom slot for the wires off center and the 25cover the slot is centered also the valve adjustment plate on the 25 is centered with the slot and the 20 is slightly offset. Edited December 13, 2016 by carmover (see edit history) Link to comment Share on other sites More sharing options...
carmover Posted December 13, 2016 Author Share Posted December 13, 2016 The one I have is not twice as wide as the 25 cover as I stated in an earlier post.it is actually 21/4 as seen in the photos above Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted December 13, 2016 Share Posted December 13, 2016 For those looking, 2.301 of the big book lists 2 early 6 cyl covers. cover number 37951 H-K-1921/22/23 6 cyl 165408 1924 6 cyl, 1925 Master and I just learned that H is 1919 and K is 1920. :-) so if it is the earlier one, 1919 to 1923 Hugh Link to comment Share on other sites More sharing options...
carmover Posted December 14, 2016 Author Share Posted December 14, 2016 (edited) Thanks Hugh,For the research,this should clear it up as I know it is a 6 because I put it up against my 25 six and it was the length of the head from end to end. Edited December 14, 2016 by carmover (see edit history) Link to comment Share on other sites More sharing options...
Guest Motorrad Posted December 18, 2016 Share Posted December 18, 2016 I'm not clear, will this fit my 1928 standard? If it will I'll take it. Link to comment Share on other sites More sharing options...
carmover Posted December 18, 2016 Author Share Posted December 18, 2016 Motoorad,I am sorry but it won't fit the 28.It is for the earlier Buicks around 19 to 23.It is wider than the mid 25s and the holes will not line up. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now