Gunsmoke Posted August 21, 2016 Share Posted August 21, 2016 I found a pair of rough but scarce Chrysler Eight hubcaps this past week, looking for 2 more (or a set of 4), they are as shown in photo, inside ring is about 6.5" for a 6&9/16" opening in wire wheel. At this point I'm less concerned about overall condition, so let me know if you have something. 3rd hubcap shown is apparently an aftermarket one which also fits in 6&9/16" opening, if anyone has any of these let me know. Rebuilding a '31 CD8 Roadster. Also does anyone know what color script was, black, red? I painted these myself yesterday just to see what they would look like. Link to comment Share on other sites More sharing options...
keiser31 Posted August 21, 2016 Share Posted August 21, 2016 The cap with the "C" on it looks to be a 1931 CM6 cap. Link to comment Share on other sites More sharing options...
dpcdfan Posted August 21, 2016 Share Posted August 21, 2016 Those are actually 32-33 Chrysler 8 caps. The 3 CD8 has the old english C and is also just over 6 1/2" opening. 31 CM looks the same but has a 6" opening. Sending you a pic of the correct caps and a photo of the CD8 coupe I recently purchased. Link to comment Share on other sites More sharing options...
Gunsmoke Posted August 21, 2016 Author Share Posted August 21, 2016 Thanks for details on hubcaps. I gather all of these hubcaps are hard to find in any condition. Let me know if you have some spares. As for the CD8 coupe, that will make a nice restoration project, don't imagine there are many still around. Appears roof has been mangled? Or was it initially framed in wood? Do you have all the missing parts? Link to comment Share on other sites More sharing options...
dpcdfan Posted August 21, 2016 Share Posted August 21, 2016 5 hours ago, Gunsmoke said: Thanks for details on hubcaps. I gather all of these hubcaps are hard to find in any condition. Let me know if you have some spares. As for the CD8 coupe, that will make a nice restoration project, don't imagine there are many still around. Appears roof has been mangled? Or was it initially framed in wood? Do you have all the missing parts? Hi Gunsmoke, I had 16 caps I sent to Switzerland about 6 months ago, befoe I bought the coupe. I'm getting some caps with the car, but not sure if I'll have any extras. You're correct, they are getting tough to find but the good new is you can peel the outer brass skin away from the backinh and straighten them. The CD8 I have has the canvas roof framed in wood. The wood framing and mechanism for the rear window is inside the rumble seat. I have most all the parts. The car is a dual side mount car with a luggage rack. Link to comment Share on other sites More sharing options...
Gunsmoke Posted August 21, 2016 Author Share Posted August 21, 2016 Good to know you have everything, regardless of the condition of the parts. My Roadster was missing at least 50% of its original parts, making for a real difficult rebuild. As for the "wood roofed coupe", I helped a friend over the past 2 years rebuild his '27 Pontiac Landau Coupe, which was constructed much like your CD8, but most of the roof wood was completely missing, and no plans/patterns available. We used pictures and some photos from a Fisher Body Service Manual to figure out what may have been there, and finished it off. Car is seen this summer at local show with my restored and soon to be painted '31 Chevrolet Deluxe Coach Link to comment Share on other sites More sharing options...
Gunsmoke Posted August 26, 2016 Author Share Posted August 26, 2016 dpcdfan, I see the mate for your CD Coupe for sale on Hemmings Daily Blog, 31K, looks like very nicely restored car. Nice buy for someone, likely a lot less expense than restoring one! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now