fatbuick Posted July 13, 2016 Share Posted July 13, 2016 These latest kits have been designed to fit standard 15" factory rims and parts are readily available in the USA to make your own kit. In Australia and NZ we're selling the complete kit as shown but we're offering US customers a Bracket and Hardware Kit. Exclusive to USA Customers approx US$279 +shipping click here to details We will supply US customers all the correct part numbers. Australian & NZ Customers click here for pricing & details I look forward to any comments or questions. 1 Link to comment Share on other sites More sharing options...
Carbuff2 Posted July 15, 2016 Share Posted July 15, 2016 Be sure that you understand that when you order the BRACKET KIT, it is the BRACKET KIT W/ MOUNTING BOLTS ONLY, not everything pictured in the illustration. That is my comment. Link to comment Share on other sites More sharing options...
fatbuick Posted July 15, 2016 Author Share Posted July 15, 2016 Good comment, thanks for emphasizing this fact. Your purchase includes the following items only for your specific Buick model: Left & Right main adaptor brackets Left & Right caliper mounting brackets All mounting hardware: high tensile bolts/nuts and crush tubes specifically for your model. You will purchase the following items in the USA yourself: *we will provide all the part numbers and suggested suppliers in the USA New Vented Rotors 11.86" (301.244mm) dia 1.28" (32.5mm) thick - Full size Buick 5 on 5" stud pattern Left & Right powerful Calipers and Pads Inner and outer wheel bearings and seals Correct Rubber hoses and Banjo Bolts 1 Link to comment Share on other sites More sharing options...
Mass9192 Posted April 23, 2017 Share Posted April 23, 2017 Sweet! In the process of converting my drums to disc brakes. Was looking around and found this post ??. Finishing up the whole front end with PST super kit and Addco front sway bar. Also front end 2inch and 1inch rear lowering kit from jamco with kyb shocks. Are these bracket kits better than scarbird? Link to comment Share on other sites More sharing options...
Mass9192 Posted April 23, 2017 Share Posted April 23, 2017 On 7/12/2016 at 5:30 PM, fatbuick said: These latest kits have been designed to fit standard 15" factory rims and parts are readily available in the USA to make your own kit. In Australia and NZ we're selling the complete kit as shown but we're offering US customers a Bracket and Hardware Kit. Exclusive to USA Customers approx US$279 +shipping click here to details We will supply US customers all the correct part numbers. Australian & NZ Customers click here for pricing & details I look forward to any comments or questions. In your opinion are these better than the ones that are made by scarbird? Link to comment Share on other sites More sharing options...
rodneybeauchamp Posted April 23, 2017 Share Posted April 23, 2017 Hi Tony, well done on producing the disc brake conversion. If it is the standard Buick 5x5 pattern, does this means that later factory rally wheels will bolt straight on to a 63 (with the large front hub) without the need for spacers or machining of the wheels? Rodney Link to comment Share on other sites More sharing options...
fatbuick Posted April 24, 2017 Author Share Posted April 24, 2017 Hi Rod, Yes, later standard 15" factory rallye wheels or standard rims will accommodate this kit without any modifications to a 63-65 Riv or the rims. In reply to Mass9192 question, the feedback we have confirms this. Testimonials These are all the Buick Products I make: click here USA customers: We do not recommend Duralast parts. Calipers and bearings we purchased from Autozone were faulty. 1 Link to comment Share on other sites More sharing options...
fatbuick Posted April 24, 2017 Author Share Posted April 24, 2017 For 63 Rivs, one thing I forgot to mention is that you will need 5 RH wheel nuts for the left side. Factory studs have LH threaded nuts. 1 Link to comment Share on other sites More sharing options...
Mass9192 Posted April 24, 2017 Share Posted April 24, 2017 1 hour ago, fatbuick said: Hi Rod, Yes, later standard 15" factory rallye wheels or standard rims will accommodate this kit without any modifications to a 63-65 Riv or the rims. In reply to Mass9192 question, the feedback we have confirms this. Testimonials These are all the Buick Products I make: click here USA customers: We do not recommend Duralast parts. Calipers and bearings we purchased from Autozone were faulty. Thanks for the info much appreciated! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now