Bushwack Posted February 23, 2016 Share Posted February 23, 2016 I let the car idle for 3-4 minutes before starting the day (car hasn't been driven in three weeks). As soon as I pressed down on the accelerator, I heard a faint click-click-click noise coming from inside (it sounds like a playing card hitting against the bicycle wheel spokes when in motion). As soon as I turned on the a/c, the noise went away. When I turned off the a/c, the noise was gone...until I would press down on the accelerator and the noise would come back. The noise would only stop when I turn on the a/c (noise remains if I turn on the heater or defogger). And once the a/c has been turned off, the noise would only come back when I accelerate . With the car coasting, there's no noise. Only when I start accelerating; then the noise stays whether or not I'm accelerating. Took it to my mechanic and he thinks its the Blendoor actuator (never heard of this part). Would like some feedback if that makes sense. He says he'll initially have to remove the glove box to replace what is, I think, a bad motor. Any suggestions, advice or input is appreciated. Thanks. Link to comment Share on other sites More sharing options...
jonlabree Posted February 23, 2016 Share Posted February 23, 2016 Check all of you vacuum lines. Sound like you may have a leak. You could also put a gauge on it and find out how much vacuum you have. Link to comment Share on other sites More sharing options...
Guest Rp1967 Posted February 23, 2016 Share Posted February 23, 2016 Used to install one way vaccum check valves in the main vac line so the vaccum to the actuators didn't drop on hard acceleration. Link to comment Share on other sites More sharing options...
jonlabree Posted February 24, 2016 Share Posted February 24, 2016 There are check valve in the system. Link to comment Share on other sites More sharing options...
Bushwack Posted February 24, 2016 Author Share Posted February 24, 2016 If there was a vacuum leak, wouldn't I have some loss of power? Car appears to be fine mechanically. Link to comment Share on other sites More sharing options...
DAVES89 Posted February 24, 2016 Share Posted February 24, 2016 There's vacuum for your engine and vacuum for your heat/A/C controls. Two different systems. Link to comment Share on other sites More sharing options...
harry yarnell Posted February 24, 2016 Share Posted February 24, 2016 Explain the difference. A HVAC vacuum leak WILL affect engine operation. Link to comment Share on other sites More sharing options...
Ronnie Posted February 24, 2016 Share Posted February 24, 2016 (edited) The HVAC Programmer has both vacuum and electrical controls contained in it. Vacuum doesn't control the blend door if that is the source of the clicking. It is controlled by a DC motor as described in the FSM (below). Below is a photo of the blend door connection to the rod coming from the DC motor in the programmer. You can remove the glove box and observe what is happening when the noise is happening. It could be that the rod has came loose from the white plastic connector causing the programmer to "hunt" trying to get the blend door in the correct position. Hope this helps. . Edited February 24, 2016 by Ronnie (see edit history) Link to comment Share on other sites More sharing options...
Bushwack Posted February 24, 2016 Author Share Posted February 24, 2016 There's vacuum for your engine and vacuum for your heat/A/C controls. Two different systems. If the HVAC is off and the noise appears, how would a leak affect it? I would think the opposite - vacuum leak would be a reason for the noise if the HVAC was on. Link to comment Share on other sites More sharing options...
DAVES89 Posted February 24, 2016 Share Posted February 24, 2016 If that clip is broke, a rod clip from the door also works. I even think it is heavier duty. At any rate easier to find/pull in a You Pick yard as there are many door panels off, but not so many glove boxes out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now