rapom Posted December 28, 2015 Share Posted December 28, 2015 Is there supposed to be one at the top of coil spring between it and the frame or does the coil spring come in direct contact with the frame? My car sits a bit higher on the pass side since I installed the vintage air system which removed a lot of weight off the pass side. My car has a 1/8 shim plus the rubber or leather isolator which may or may not be stock since the car has had many owners and spring changes. I install 2" over stock last year replacing the 3" under stock which the car had in it when I bought it. I may be ok just removing the shim. Thanks for any help in advance. Link to comment Share on other sites More sharing options...
slosteve Posted December 28, 2015 Share Posted December 28, 2015 My '65 had a factory looking spacer/pad on only one of the two front coils. Being the forth owner, I don't know if it has been apart before but it still had the original shocks. Steve Link to comment Share on other sites More sharing options...
rapom Posted December 28, 2015 Author Share Posted December 28, 2015 I am also pretty sure that my drivers side didn't have any type of pad, isolator. Just wanting to know what is supposed to be there. thanks for the reply. Any other comments? Link to comment Share on other sites More sharing options...
telriv Posted December 30, 2015 Share Posted December 30, 2015 Remove the shim & the isolater. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now