beerczar1976 Posted April 3, 2015 Share Posted April 3, 2015 I was able to pull door access cover panels from an ebay seller. For whatever reason, my car as purchased from PO, didn't have them. What is the correct thickness of the rubber bumpers that attach to the top side of the triangular bracket? CARS sells at least two different thicknesses. As I understand, the windows when lowered are supposed to rest on top of these brackets/stops. The rear door covers are the only ones with these brackets. This must stop the window from going all the way down; I know many modern 4-door cars do not allow the rear windows to go down all the way leaving an inch or two of glass sticking up above the door frame when fully down. The front covers are just that, they cover over the access hole. I'll try to dig back thru all the various manuals that I have to see if they call out the right thickness. Link to comment Share on other sites More sharing options...
buick5563 Posted April 3, 2015 Share Posted April 3, 2015 I believe those are just bumpers to prevent harming the bottom channel. Lower your window to where it looks good and measure the distance. I honestly doubt that 3/8 vs 1/2" will make a difference. Link to comment Share on other sites More sharing options...
old-tank Posted April 3, 2015 Share Posted April 3, 2015 I usually find the bumper that I need in the bottom of the door Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now