elusive seals bushings and bearings for sharknose graham tranny.

[Guest steve k]

hi there,

my transmission guy is going crazy looking for seals, bushings and bearings for my graham trany.

a three speed column shift with syncro 2nd & 3rd.

it is a Warner gear t-88-1F WG / division W // adaptor R7-8E // overdrive R7-1B

i have found main bearing listed on e-bay otherwise nothing. can't find a listing for a t-88 anywhere.

could it be a variation on the t-86?

thanks in advance.

[Larry W]

Take the original parts to an industrial bearing supplier and they will measure and match up needed bearings, bushings and seals.

Edited July 10, 2014 by Larry W (see edit history)

[cahartley]

Listen to Larry.

Call your nearest Motion Industries branch and give them all the information you have.

http://www.motionindustries.com/motion3/jsp/mii/LocationsMI.jsp?LANGUAGE=0

Motion is hooked up with nearly every bearing supplier on the planet.

[Guest steve k]

thanks for the tips.

[Guest Commodore]

My interchange manual says that a T88-1F transmission was also used by 1939 Studebaker Commander and President with overdrive and column shift. Other versions of T88 transmission were used by 1938 - 39 Studebakers. For parts try Northwest Transmission Parts. See link.

http://nwtparts.com/

[hddennis]

If you run into obsolete bearing numbers try:

George Bachleda

Olcar Bearing Company

135 James Creek. Southern Pines, NC. 28387

910-693-3324

George is great to deal with and has found me many bearings no one else could.

Howard Dennis