Ltaylor Posted February 6, 2014 Share Posted February 6, 2014 I have a Stromberg U2 carburetor That I bought 2 years ago for my 29 Dodge. While working on the car, I broke an ear on the carburetor, where it bolts to the exhaust manifold. I have had no luck finding anyone to repair it ( pot metal ) and either need to find a replacement for this piece or sell the other parts to recoup some of my money ( it was not cheep ). Any help out there? Ltaylor Link to comment Share on other sites More sharing options...
Guest Hudson33 Posted February 6, 2014 Share Posted February 6, 2014 (edited) Sorry about that story. If it is only good for parts why not try drilling a couple horizontal hole from the pieice to the base, and insert some small pins, vee out the crack top and bottom and use JB Weld?If that fails then recoupe costs for partsF Edited February 6, 2014 by Hudson33 oops (see edit history) Link to comment Share on other sites More sharing options...
Ltaylor Posted February 6, 2014 Author Share Posted February 6, 2014 You might have something there, can't do any more damage can I Link to comment Share on other sites More sharing options...
nickelroadster Posted February 6, 2014 Share Posted February 6, 2014 I would JB weld first, then drill the holes, tap them and and use either 6-40 or 8-32 size case hardened screws and thread them together. Cut off the head and finish. Will not be noticeable. and will be quite strong. I JB weld first not for strength but to make sure it is aligned. Link to comment Share on other sites More sharing options...
Guest Hudson33 Posted February 6, 2014 Share Posted February 6, 2014 I like that as well, even better idea to drill and tap then JB Weld. I have used it on a carb and was not affected by gasoline and it solved the problem of fixing damaged threads.F Link to comment Share on other sites More sharing options...
richasco Posted February 6, 2014 Share Posted February 6, 2014 (edited) I have an original U-1 carb which is nearly identical to the U-2(smaller throat size). I would never put it on my car though. The early die-cast metal is too volatile. At some point I will spend the money and a get new body from http://www.vintageandclassicreproductions.com/ They seem to have a good reputation with Dodge owners. Edited February 6, 2014 by richasco (see edit history) Link to comment Share on other sites More sharing options...
sambarn Posted February 6, 2014 Share Posted February 6, 2014 They do good work. I've seen one of their Stromberg bodies and it was lovely as well as functional. I believe their US contact is involved in the Plymouth club and can probably help you out if need be. Good Luck! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now