VickyBlue Posted July 29, 2013 Share Posted July 29, 2013 When the car was painted back in the 70's, who ever installed the wipers, did not use all parts up front... (Thanks Willie ) I just had the motor redone by the wiperman and it works. However, I am not sure what parts I need up front as the service manual that I have does not show the wiper system. It seems they only installed the cables and shafts from under dash and nothing else outside the car by the cowling. I did get on ebay but before I make a purchase, I would like to know if anyone could post a picture of the wiper base and tell me which of these parts (if not all) I need. This is what I have so far. I don't know if the 55 bezel will fit the 56. This is from ebay: Do I need them both or just one and which one? Thanks:) Link to comment Share on other sites More sharing options...
Guest NikeAjax Posted July 29, 2013 Share Posted July 29, 2013 Gosh, those look exactly like the ones on my '56... install them ALL by order of size, from largest to smallest.Jaybird Link to comment Share on other sites More sharing options...
old-tank Posted July 29, 2013 Share Posted July 29, 2013 My 55 would use both bezels and the nuts...I don't recognize the flat pieces. You will need to remove the top of the dash and loosen the braces that hold the pivots in place... a little tricky. Put some sealer or glue a thin gasket on the bottom of the bezels. Make your own spanner wrench to tighten the nuts. While the top is off the dash, hook up hoses to the squirters. Any new on your a/c?Willie Link to comment Share on other sites More sharing options...
Guest NikeAjax Posted July 29, 2013 Share Posted July 29, 2013 The "flat pieces" act as guides, and if you'll pardon my super high tech verbiage, "holder-onners"... check it out yo:right about in the center of the image, you can see the channel that the holder-onners fit into: keeps em from flyin' OFFT(off), it's got some white paint in it, just in case ya miss it...Jaybird Link to comment Share on other sites More sharing options...
old-tank Posted July 29, 2013 Share Posted July 29, 2013 JaybirdThanks for the clarification.Willie Link to comment Share on other sites More sharing options...
VickyBlue Posted July 30, 2013 Author Share Posted July 30, 2013 Nothing with the A/C yet. It is so hot in the garage, I can't even breathe... Email me Mike's number, I might drive up to Austin and say hi and see how I can do this... $65 plus shipping for "holder-onners" Jaybird... $20 for the bezels and the nuts. Link to comment Share on other sites More sharing options...
Leif Holmberg Posted July 30, 2013 Share Posted July 30, 2013 (edited) This`s how it looks on driver side (left).Pictures from a Roadmaster.Leif in Sweden. Edited July 30, 2013 by Leif Holmberg (see edit history) Link to comment Share on other sites More sharing options...
VickyBlue Posted July 30, 2013 Author Share Posted July 30, 2013 tack så mycket Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now