1931 Cadillac V12 fuel lines and fittings

[RHR]

I am looking for the fuel lines and fittings for a 1931 Cadillac V12, specifically the lines and fittings from the vacuum tank to the carbs. I need all the fittings including the ones that go into the Johnson carbs. If anyone knows, please let me know. thanks, Robert

[old car fan]

I am certain we have all the fittings for the vacuum tank,If you can send me pics and sizes,i can see what we have.

Edited February 11, 2013 by old car fan (see edit history)

[RHR]

I am looking for all the fittings from the carb back to the vacuum tank. i will have to get some pictures for you, but any picture of the Cad V12 setup will do if you have any on hand.

thanks

Robert

[RHR]

I am looking for all the fittings from the carb back to the vacuum tank. i will have to get some pictures for you, but any picture of the Cad V12 setup will do if you have any on hand.

thanks

Robert

[TexRiv_63]

Robert,

I'm not familiar with the 31 but I did a carb conversion on a 32 V12 and replaced all the lines and fittings. I used cunifer tubing which when polished looks like nickel and I was able to find brass fittings which were an appearance match for the originals but would need plating to be totally correct. I looked the fittings up at McMaster Carr's website, McMaster-Carr# printed out the description and photo, then was able to find them at my local True Value hardware and NAPA stores. Some had to be special ordered. I can post or e-mail you some photos if they would be helpful.