Guest peatree Posted September 22, 2011 Share Posted September 22, 2011 could anyone tell me where i could buy a 1925 chrysler master chylinder or tell me what else might fit. thanks. Link to comment Share on other sites More sharing options...
keiser31 Posted September 22, 2011 Share Posted September 22, 2011 Maxwell may fit. Link to comment Share on other sites More sharing options...
hchris Posted September 23, 2011 Share Posted September 23, 2011 Maxwell may fit.Unfortunately no Maxwell had mechanical brakes, however any of the early Chrysler vehicles thru to about 1932, or even Plymouth, should be suitable Link to comment Share on other sites More sharing options...
Dandy Dave Posted September 23, 2011 Share Posted September 23, 2011 If you have the original, it can be re-sleeved if the bore is bad. There are shops around that specialize in doing this. Dandy Dave! Link to comment Share on other sites More sharing options...
keiser31 Posted September 23, 2011 Share Posted September 23, 2011 Unfortunately no Maxwell had mechanical brakes, however any of the early Chrysler vehicles thru to about 1932, or even Plymouth, should be suitableYep...I was wrong about the Maxwell. Don't know what I was thinking. I do know however that the 1930-32 master cylinders will not bolt up. I am pretty certain that those master cylinders mount from the rear of the cylinder and the early ones mount from the side. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now