mlavin73 Posted September 5, 2011 Share Posted September 5, 2011 Have a ton of Packard Parts I am looking to get rid of prior to Hershey. I have more than I could easily bring out in a trip. I don’t have an accurate inventory of what I have (some years / models are unknown). We know the bulk of my parts were from 28-32 (some were older, some were newer) Here is an idea of some of the things :2 Shutters, Radio, 4 drums - Real nice condition, 1 Set of Sidemount Arms, Luggage Rack (29-31), Luggage Rack Arms, 1 Set Luggage Rack Rails, Side Mount Tire Cover, 2 Sidemount hub covers, 2 Lightbars, 1 Bijur Pump or Tank,<O:p</O:pSome bumpers, Stone Guards for 31 and one for a 32, Trunk Lid, 1 Disk wheel and trim ring, 3 sets of hoods, 4 19 inch Packard Wire Wheels and rings, 2 19 inch Wire Wheels and rings (not sure what they go to), 4 Rear Doors (believe most of the guts are still present aswell as trim panel), 1 Front Door, Steering Column with wheel, Steering Wheel, Horn, Toolbox, Air Cleaner, Distributor Caps, Radiator Inlet Covers, Parking Brake Handle Parts, Headlamps (Probably 4 or 5 sets), Gas Tank Cover, 2 Tail light trim bezels, Jack Parts, Fan Blade<O:p</O:pRunning Board Moldings, 13 Various Fenders - 1 is def a NOS (still has the paper), 2 others are tagged NOS but may be early take offs<O:p</O:pA video walkthrough can be seen at . The only thing that has been sold since the time this video was taken was the 2 tires. I’m hoping to have someone within driving distance of Northwest NJ purchase because I cannot ship this. Make me an offer on some or all. Link to comment Share on other sites More sharing options...
arts239 Posted September 6, 2011 Share Posted September 6, 2011 please email me at: vintgecars@sbcglobal.net with your phone number to discuss items you have. Thanks Link to comment Share on other sites More sharing options...
mlavin73 Posted September 6, 2011 Author Share Posted September 6, 2011 Just sent you an e-mail dayz Link to comment Share on other sites More sharing options...
Restorer32 Posted September 6, 2011 Share Posted September 6, 2011 I would be interested in knowing the length and width of the single bar bumpers. Link to comment Share on other sites More sharing options...
mlavin73 Posted September 6, 2011 Author Share Posted September 6, 2011 I will try to get that information to you today restorer32. Link to comment Share on other sites More sharing options...
Restorer32 Posted September 6, 2011 Share Posted September 6, 2011 Thank you. Please measure the length from center of one eye to the other. Also measure the width. Link to comment Share on other sites More sharing options...
mlavin73 Posted September 6, 2011 Author Share Posted September 6, 2011 Ok here is what it looks like to me restorer32. All my bumpers appear to be 4 1/8th inch wide. Then the measurements from center of the eye to center of the eye is:66 3/4th - have 2 of these61 1/2 - have 2 of these65 1/2 - have 1 of theseThe measurements I have provided appear to be correct. I was out in the rain working by myself. If there is a slight discrepency with the measurement let me know and I will double check. Let me know if any of these are right and I will work with my father in law on a price. Here are some pictures as well...not the best as the weather is not great here. Thanks. Mike Link to comment Share on other sites More sharing options...
West Peterson Posted September 6, 2011 Share Posted September 6, 2011 Could you PM me with a price on the 19" Packard wheels, please? Are they disc or spoke? Link to comment Share on other sites More sharing options...
mlavin73 Posted September 6, 2011 Author Share Posted September 6, 2011 West I have 1 disc and a few spoke. Which are you looking for? I'll PM you with a price after I speak with my father in law. Link to comment Share on other sites More sharing options...
Restorer32 Posted September 6, 2011 Share Posted September 6, 2011 Well, I can tell you what the bumpers aren't. They aren't for a '33 Standard. Too bad. Link to comment Share on other sites More sharing options...
Restorer32 Posted September 6, 2011 Share Posted September 6, 2011 Thanks for taking the time to measure them. Link to comment Share on other sites More sharing options...
West Peterson Posted September 6, 2011 Share Posted September 6, 2011 West I have 1 disc and a few spoke. Which are you looking for? I'll PM you with a price after I speak with my father in law.Looking for spoked. Link to comment Share on other sites More sharing options...
mlavin73 Posted September 6, 2011 Author Share Posted September 6, 2011 No problem restorer32. Good luck in your search for the bumper. I had one other set that sold already and that went to a 32. If you need anything else please let me know.West I have 4 19 inch Packard wire wheels left....and 2 other that we're not sure what they go to because they have a larger hub opening. Of the 4 here is their descriptions, hopefully the pictures describe the issues:-2 of them, someone elongated the valve stem openings - my father in law could fix these.-1 has a piece missing along the edge - I think my father in law said this should be sold as a parts wheel. Don't recall if he said he could fix it-1 appears to be ok.I do have trim rings for all these. How would you be looking for the rims? As-Is or repaired? Let me know and I will talk to my father in law.Had you seen my post last Oct / Nov I had more rims without any issues. I also had a real nice set of 6 mounted with tires, but those went almost as soon as I got them. Link to comment Share on other sites More sharing options...
Earl B. Posted September 7, 2011 Share Posted September 7, 2011 mlavin, please check your private messages...B Link to comment Share on other sites More sharing options...
mlavin73 Posted September 7, 2011 Author Share Posted September 7, 2011 Sorry packard32. I thought I responded this morning. Just tried again. Let me know if you get it. Link to comment Share on other sites More sharing options...
Guest hogbakken Posted September 18, 2011 Share Posted September 18, 2011 Is it possible to visit you saturday 30th or sunday 1th on our way to the Hershey market?stein@packard.no Link to comment Share on other sites More sharing options...
mlavin73 Posted September 18, 2011 Author Share Posted September 18, 2011 Sure you can stop by on the 30th or 1st hogbakken. Are you looking for indivual parts or the whole lot? Let me know. I'm located in Layton, NJ Link to comment Share on other sites More sharing options...
mlavin73 Posted September 21, 2011 Author Share Posted September 21, 2011 Looking for $8500.00 or best reasonable offer for the whole lot. If the whole lot doesn’t sell I will bring some to Hershey. Not all will fit in my truck so if there is anything you may be interested in, PM me and I will try to get it on the truck to Hershey. Will post my location there prior to heading out. Thanks. Link to comment Share on other sites More sharing options...
mlavin73 Posted September 27, 2011 Author Share Posted September 27, 2011 Hogbakken. I haven't heard from you since asking for my address via e-mail. Are you still planning on coming? I'm stopping work early that day so I need to know. Please call to confirm at the number I sent you. Thanks. Link to comment Share on other sites More sharing options...
mlavin73 Posted October 2, 2011 Author Share Posted October 2, 2011 My location at Hershey will be C3L17 through 25. I will be out there Tuesday afternoon and will stay until Friday pm. I will be loading up whatever I can fit into the truck Monday afternoon. If anyone is coming through the Northwest NJ area and wants to see / buy any or all of the items prior to getting out to Hershey I can make arrangements. Thanks….see you there. Link to comment Share on other sites More sharing options...
tool Posted September 12, 2013 Share Posted September 12, 2013 I have a 32 standard8, and need a steering wheel, running board mldgs, stone guard, air cleaner, and bijur tank. Do you have available, and what price?ThanksJim Griggsjgriggs44@aol.com Link to comment Share on other sites More sharing options...
lionalfa750 Posted September 17, 2013 Share Posted September 17, 2013 I was able to see some parts of interest to me can you email me at lionel.velez@gmail.com or call me at 972-849-6306 to discuss? Thanks, Lionel Link to comment Share on other sites More sharing options...
Ozstatman Posted September 17, 2013 Share Posted September 17, 2013 In another thread in Post #6 there is advice the parts are all sold, see this link - http://forums.aaca.org/showthread.php?t=337643&p=1152868#post1152868 Link to comment Share on other sites More sharing options...
mlavin73 Posted September 17, 2013 Author Share Posted September 17, 2013 Hi Lionel. Ozstatman is correct. All parts have been sold. Thanks Mike Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now