RickBrinker Posted May 19, 2011 Share Posted May 19, 2011 I changed my water pump shaft on my 25 12vt,turned the Engine over to drive the pin in the fan pulley and hadn't hooked up the Distributor now I'm lost and the Chicken won't help. Link to comment Share on other sites More sharing options...
TonyAus Posted May 19, 2011 Share Posted May 19, 2011 The timing marks on your flywheel should be visible through the hole in the bellhousing. Turn until "C 1&4" appears then another eight degrees until "I" - that is your full retarded ignition point for no 1 cylinder. If you do not have the hole, ascertain TDC on no 1 cylinder by holding your thumb over the spark plug hole. The eight degree point past there is when no 4 exhuast valve is just closing.In any event, due to the two bolt connection for the distributor you can only be 180 degrees out with the timing. If the engine will not start, turn the coupling through 180 degrees. Link to comment Share on other sites More sharing options...
RickBrinker Posted May 19, 2011 Author Share Posted May 19, 2011 Got it started Thank's Link to comment Share on other sites More sharing options...
MikeC5 Posted May 19, 2011 Share Posted May 19, 2011 The Chicken? Link to comment Share on other sites More sharing options...
RickBrinker Posted May 20, 2011 Author Share Posted May 20, 2011 Yea the chicken finally told me how. Link to comment Share on other sites More sharing options...
MikeC5 Posted May 20, 2011 Share Posted May 20, 2011 Robot Chicken? Link to comment Share on other sites More sharing options...
1936 D2 Posted May 20, 2011 Share Posted May 20, 2011 Naw. He's stupid compared to the "Real Chicken" !!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now