Guest smessing Posted January 9, 2011 Share Posted January 9, 2011 Have just found a dodge panel wagon WF31 Judging by some various info I have I think its a 41 or 42. Serial number81305456. I think it was made new as a fire assist truck maybe. It has 110 electrical box in cab as well as another unique looking plug in under dash area. Will be starting complete restoration soon and looking for info and some replacement parts. Can anyone help with year of info of any kind. thanks Steve Link to comment Share on other sites More sharing options...
keiser31 Posted January 9, 2011 Share Posted January 9, 2011 (edited) You should scroll down to the "Dodge Brothers trucks" forum and post this there. A book I have shows the "WF" as a 1942, but verify that with the Dodge truck guys. Edited January 9, 2011 by keiser31 (see edit history) Link to comment Share on other sites More sharing options...
Guest smessing Posted January 23, 2011 Share Posted January 23, 2011 Have a problem with fuel tank turning to varnish. Emptied and rinsed out with gas but fuel inlet line inside of tank is clogged. What will eat this old varnish inside the fuel inlet. It has been sitting since 1986. Thanks Link to comment Share on other sites More sharing options...
nearchoclatetown Posted January 24, 2011 Share Posted January 24, 2011 I've used acetone with some success. A wire through any tubing you can get to is best. Link to comment Share on other sites More sharing options...
Guest smessing Posted January 24, 2011 Share Posted January 24, 2011 thanks Link to comment Share on other sites More sharing options...
Guest smessing Posted January 24, 2011 Share Posted January 24, 2011 Also have a question that involves mostly opinions. Why shouldnt I keep my 6 volt system on my 41 dodge panel wagon Link to comment Share on other sites More sharing options...
nearchoclatetown Posted January 24, 2011 Share Posted January 24, 2011 IMO, there's no good reason to change. Link to comment Share on other sites More sharing options...
Guest smessing Posted March 4, 2011 Share Posted March 4, 2011 Now looking for back inner fenders. I have found everything else but this. I'm sure I could use another one but would prefer original style as they will be left exposed as original. thanks Steve Link to comment Share on other sites More sharing options...
Rusty_OToole Posted March 5, 2011 Share Posted March 5, 2011 Be sure you clean out all the old varnish, it will ruin your motor if you don't. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now