JZRIV Posted May 10, 2010 Share Posted May 10, 2010 I would like to make the steel line that went from the back of front carb fitting to just over the left valve cover for the hose connection to brake booster. I would need diameter of tubing, and length between each bend.I think there was also a metal bracket on this line that bolted under the valve cover bolt. Would also appreciate dimensions on the bracket and/or perhaps a close-up pic.Thanks in advance for any help Link to comment Share on other sites More sharing options...
Patrick91914 Posted May 10, 2010 Share Posted May 10, 2010 there was a guy on ebay, buickrodder, who reproduces them (at least he did about a year ago). they were a perfect repro. Link to comment Share on other sites More sharing options...
RivNut Posted May 10, 2010 Share Posted May 10, 2010 Russ Martin is "Buick Rodder." He lives in Grass Valley, CA.Here's his website. I'm trying to download the page with the part on it that you're wanting. $20.00Buick PartsEd Link to comment Share on other sites More sharing options...
JZRIV Posted May 10, 2010 Author Share Posted May 10, 2010 Thanks Guys! I had seen Russ had them and I should known that would be one of the first suggestions. Its such a simple line I thought I'd make one for a couple bucks but if I can't get dimensions, I guess I'll have to order one. You're probably thinking I'm so tight I squeek worrying about spending $20 plus shipping, but on a project this big, $20 here and there adds up to alot in the end. Link to comment Share on other sites More sharing options...
Patrick91914 Posted May 11, 2010 Share Posted May 11, 2010 I have one and compared it to an original and they're identical. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now