Guest wrought Posted March 2, 2010 Share Posted March 2, 2010 This is my first post.I'm looking for a supply that would possibly have engine parts for my 1941 Graham, I'm rebuilding the engine and will need bearings etc.Also simple tune up parts. Any ideas? Link to comment Share on other sites More sharing options...
Guest Dennis Gooch Posted March 2, 2010 Share Posted March 2, 2010 This is my first post.I'm looking for a supply that would possibly have engine parts for my 1941 Graham, I'm rebuilding the engine and will need bearings etc.Also simple tune up parts. Any ideas?Hi Hop on to this website cheers Denniswww.graham-paige.com Link to comment Share on other sites More sharing options...
Guest Norgermish Posted June 11, 2012 Share Posted June 11, 2012 Hi all,I am wondering where to locate the vin number on a '41 graham paige. This car is going to be sold but need some info about the car. Any help would be appreciated. The car is stripped down but has most components, everything is in boxes or trunk or interior....no interior seats. Needs a lot of work. But still I need the vin number Thank you, Link to comment Share on other sites More sharing options...
alsancle Posted June 11, 2012 Share Posted June 11, 2012 The vin plate on a Hollywood is on the floor behind the right front passenger seat. The engine number is on a plate mounted on the right side of the engine. Link to comment Share on other sites More sharing options...
alsancle Posted June 11, 2012 Share Posted June 11, 2012 Also, the chassis number is stamped on the top of the right front frame horn just forward of the shock mount. Link to comment Share on other sites More sharing options...
Guest Norgermish Posted June 12, 2012 Share Posted June 12, 2012 Thank you for the help Link to comment Share on other sites More sharing options...
jimkf Posted June 12, 2012 Share Posted June 12, 2012 Got some pix of the Graham? I'm in the market! Link to comment Share on other sites More sharing options...
Guest Norgermish Posted June 12, 2012 Share Posted June 12, 2012 Hi Jim, I do have some photos, how can I send them to you? Link to comment Share on other sites More sharing options...
Rusty_OToole Posted June 13, 2012 Share Posted June 13, 2012 I believe Continental made the motors used by Graham at that time. If so it should make parts easier to find. No doubt the Graham club will have the details. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now