1926Roadster Posted September 6, 2009 Share Posted September 6, 2009 Does anyone have or know where I can get a drawing for the Pop Metal plate the the points mount on in a Remy distributor for a 1926 Standard Six.I am going to make a few for myself and anyone else that wants them.This all depends on me programing a CNC Mill.ThanksKen GASCH Link to comment Share on other sites More sharing options...
STuTZ693 Posted September 7, 2009 Share Posted September 7, 2009 Ken,I am not an expert at AutoCad but I have had some success at making drawings.I have a Remy distributor with the pot metal plate that has been machined back to the original dimensions so the plate fits onto the distributor, the distubutor cap fits, and point mounting plate freely for manual advance.I will try and produce a drawing for you. Link to comment Share on other sites More sharing options...
1926Roadster Posted September 7, 2009 Author Share Posted September 7, 2009 DanI sure appreciate any help you can provide.ThanksKen GASCH Link to comment Share on other sites More sharing options...
STuTZ693 Posted September 9, 2009 Share Posted September 9, 2009 Ken,I will take a shot at it. Link to comment Share on other sites More sharing options...
rbk Posted September 22, 2009 Share Posted September 22, 2009 Keep us up to date with this project.Many people need this plate.There was an earlier discussion on this.I believe it was this forum.It maybe that that person is making these already.Bob Link to comment Share on other sites More sharing options...
rbk Posted September 22, 2009 Share Posted September 22, 2009 Keep us up to date with this project.Many people need this plate.There was an earlier discussion on this.I believe it was this forum.It maybe that that person is making these already.Bob Link to comment Share on other sites More sharing options...
STuTZ693 Posted September 22, 2009 Share Posted September 22, 2009 I have been studying the part in order to produce a drawing and believe that the hardest element to machine will be the angles and bump outs that the cap retainer pivots on. See the attached photo.I will start on a drawing this week.I am going to Hershey and will see if I can find anyone what has already made replacements. Link to comment Share on other sites More sharing options...
1926Roadster Posted September 22, 2009 Author Share Posted September 22, 2009 DanI have sent you an emailThanks Link to comment Share on other sites More sharing options...
STuTZ693 Posted September 27, 2009 Share Posted September 27, 2009 Ken,I received your private message and sent you one today but could not figure out how to attach my drawing file so I will attach it here.This is a draft drawing without dimensions. Look at the private message I sent today for my fax number and instructions.Remi Dist Plate 11301.PDF Link to comment Share on other sites More sharing options...
1926Roadster Posted September 27, 2009 Author Share Posted September 27, 2009 DanI got your PDF. I will take it with me next week when I talk with the instructor and I will let you know what we need.If I can program the cnc we will have all of the plates we need.Ken GASCHgasch@sbcglobal.net Link to comment Share on other sites More sharing options...
Coley Posted October 5, 2009 Share Posted October 5, 2009 Did anyone come up with this part? I have one to use for a pattern and might cast some.Are they still needed? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now