Guest Australian 1923 Posted February 20, 2008 Share Posted February 20, 2008 Can anyone help with either original felt or modern rubber oil seals for the front and rear hubs for my 23-6-45.Any help appreciated Link to comment Share on other sites More sharing options...
Dandy Dave Posted February 20, 2008 Share Posted February 20, 2008 See if you can cut some from a furnace fuel filter. The kind that are made up from felt rings and only sell for about $3 or $4 bucks. Also how did you make out with the starter generator??? Dave! Link to comment Share on other sites More sharing options...
Guest DaveCorbin Posted February 20, 2008 Share Posted February 20, 2008 Dear Dave: Would you be so kind as to post your engine and frame numbers here so I can add them to my files of Buick/McLaughlin information? Also, IF your car is a McLaughlin, the McLaughlin serial number on that plate. Thanks, Dave Corbin Link to comment Share on other sites More sharing options...
Mark Shaw Posted February 20, 2008 Share Posted February 20, 2008 Try this site and search for felt.http://www.mcmaster.com/ Link to comment Share on other sites More sharing options...
jbbuick22 Posted February 21, 2008 Share Posted February 21, 2008 Dave, The chart in Dave chamber's article shows that 23 and 24 on the 118 and 120" wheelbase use the same seal 2-5/16 x3-3/8 x 5/8, Chicago rawhide #526. The front seal, all 23 & 24 plus 25-28 Master Ch. Raw. #601, 2-5/16 x 3-7/8 x 3/8 Bob's Automobila list seals for the 24-28 which seems to be the same as 23. John B. Sherborn MA22-6-55 Sport Touring #856901 Link to comment Share on other sites More sharing options...
Guest Australian 1923 Posted February 23, 2008 Share Posted February 23, 2008 Hi DaveThe chassis number is 64340 and I believe the engine number is PX5883 but I have not had the covers off to check it is correct. When I do I will get back to you. I have not found any plates relating to the body but it is reasonable to assume it was manufactured in Australia and I guess by Holden, again if I do eventually find anything I will let you know. See you at Hershey again this year.Regards Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now