abandg

Jim, 40 plus shipping. Gene,

Bob see me at Hershey I have a few new hangers. Gene. Hope there still there when you get there.

Jim are you going to the national meet. I could bring you a wheel. Gene

Krylon dull aluminum is a perfect match if it is still available.

John, The one on the right is a 63 the other one is a 64 65. I am looking at the picture using right and left. The only difference is the push control. If you look at them both the 63 has a larger handle to push. That is the only difference. Gene

I will be bringing some 63 to 65 Riv parts to the show. If anyone needs anything special let me know I will put it in the van. I can't take everything. Thanks Gene. 610-359-8901

There is an indentation or dimple on the door. If you have the linkage for the duel handles just hold it up on the inside of the door and you will see the the spot where it goes. The front handle goes in the hole already in the door. So you are only looking for the rear hole.I have done this a number of times and it was pretty easy once I saw the spot. Hope this helps. Gene.

Jerry Hammer of GM Obsolete has rebuilt sending units. He is in Arizona and a good guy to deal with. His number is 888-567-8081. Good luck. Gene.

The non factory AC car did not have the bottom hooks on the bracket to hold a fan shroud. You must remove the radiator and replace the old brackets with AC or fan shroud brackets. Then as Ed said the fan shroud sits on the bottom onto the hooks that are part of the bracket and a bolt secures the top. Not to be a job just a little time. Gene.

Andrew I have one and am going to Carlisle. If interested call me at 610-359-8901 Gene

I have 0ne here in Pa. I am right off of 95. It has been cut and still in specs. If you do buy one locally do not get a 65 drum it will not fit over the axle. Gene 610-359-8901

I have at least a half dozen front lower bumpers. Gene at 610-359-8901 EST

Still have a 65 LT 401 with trans and a 64 KW with trans. Both will need a rebuild. 300 each pick up only. Gene.

I am in the process of selling my building and have 4 65 Rivs laying around. They have to go in two weeks. I have one on the lift with complete 401 engine and the drive train is all there It ran when I drove it on the lift. I do not have time to part them all. I will take off what I want and get rid of the car. Call me if interested at 610-359-8901 eastern time. The cars are located in South Jersey. You will not pay no more than 500 per car. It's a heck of a deal. I am in the process of getting rid of these locally so get to me as soon as possible. Either way they have to go. I will not ship any cars. They will have to be picked up. Hope I can help someone. Gene Guarnere.

Do they work and are they compleye. How much are you asking. Thank you Gene.

Ned, I sent you a message. I am at abandg@aol.com. I do have trunk lot assembly and window washer container, Thanks Gene. I am also parting 3 65's or they are going to the crusher.

I am at 2800 Dogwood Lane in Broomall Pa 19008. Thanks gene.

If your car does not have A/C then you will not have the brackets to receive the shroud on the bottom holes. You will have to replace them with the correct ones.

I just received the T bolts for the door skins. They look very nice and I now have them for sale. They are 3 dollars each. I have a limited supply of these and won't have them made again. They cost a lot to get made. Also have about 70 63 to 65 bumpers in stock. I do not have the nuts for the T bolts. Gene 610-359-8901.

Sold a lot of items, still have a ton left. Going to Carlisle on the 22nd of April. I can bring what you need. All my parts are 63-64-65. Also getting rid of a few cars. Gene.

63-64-65 Rivs for sale. I have a few Rivs I am looking to sell in the spring. All have titles and need restoration. Can restore or part out. I am looking to thin out my cars. Also have parts, nailheads,trim, potmetal (some rechromed), stainless, bumpers, interiors, and many other items. I will be at Carlisle in the spring, if anyone needs something delivered. Send me an e-mail at abandg@aol.com or you can call me at 610-359-8901 EST. I am outside of Philly. Thanks Gene.

Tim, I have a 2x4 manifold and am also interested in horns. Let me know. Gene

63-64-65 Rivs for sale. I have a few Rivs I am looking to sell in the spring. All have titles and need restoration. Can restore or part out. I am looking to thin out my cars. Also have parts, nailheads,trim, potmetal (some rechromed), stainless, bumpers, interiors, and many other items. I will be at Carlisle in the spring, if anyone needs something delivered. Send me an e-mail at abandg@aol.com or you can call me at 610-359-8901 EST. I am outside of Philly. Thanks Gene.

I am outside of Philly. I have parts for 63-4-5 Rivieras.

I have a complete 63 and 64 that you can cut up. Where are you located. Gene