memech1

i am looking for some lifters and possibly a head gasket for a 1918 hupmobile four cylinder engine. possibly a good camshaft also. please let me know what you have,a price and a picture if possible. email me at memech123@yahoo.com

i have a pair of houdaille rear shocks for 46-48 fords. they have been bead blasted and a coat of black paint to keep them from rusting up. both have the dogbones on them. both move as they should with good resistance and i see no oil leaks.they have the number F-745 on the arms. i can ship these in a large flat rate box for 19 dollars. i need 100 dollars for the pair.i could probably send these international but i would need to get a shipping quote for that.

i have a good,vintage, used mallory dual point distributor,part number 2548201 and a mallory voltmaster mark 2 coil,part number 28675 for sale with a set of stainless braid plug wires to go with them. in very good condition. should be a plug and play.also has a extra pair of points with it. asking 275 for it all. i can ship for the postage amount. i prefer money order but can do paypal but would need to add 13 dollars to the price. Add Tag .

i have a couple mopar distributors for sale. one is a chrysler part number 3690201 for a race hemi high block.it has the tach drive. this is a very tight unit and should be plug and play.i need 235 dollars for it plus shipping.the second one i have is a mallory dual point part number 2557701 that fits big block 350,361,383,400 low block motors.again this is a good tight unit. i also need 235 plus shipping for it. the last thing is a set of crane adjustable rocker arms. i dont have the shafts or spacers,just the rockers. i need 400 plus shipping for them.

SOLD IT

we have decided to sell our 29 A. look over the pics and email with any questions.we need 6200 for it. we are in clinton iowa.

heres the story,a friend of mine is looking for a 31 A tank like his but with the bottom rusted or already cut out. he has this very nice tank but he doesnt want to cut up a good tank for his roadster project. he will be willing to trade his usable tank for your non usable tank and a little cash. we are in clinton iowa and i dont think it would be too cost effective to ship it because of its size. give a email or call me for info. 563-242-0650.

i am in need of a set of fourth under rod bearings for a continental/renault engine. i am told the 1964-67 renault 8 and caravelle and renault 10 engines used the same bearings.the journal is aproximately 1.73 inches in diameter and the bearing width is .812. i need the biggest undersize bearings which is .040 thousandths or 1.00 millimeter undersize.please let me know if you have any or know where i might be able to find some.

this volkswagon is a very solid project. the motor has been rebuilt and test run but has no miles on it.if anyone knows the late rick block from folletts iowa then you know the motor work is of the best quality. the body is VERY solid and there are a truckload of spare parts that go with it.i even found a automatic trans in pieces inside the car.the car itself is a stick of course. we have a clean title for it also. call or email with questions. our shop number is 563-242-0650, best time to call is between 11-3 daily and saturdays. we need 2850 for this nice little bug.

my nephew and i have been doing our research on the rambler. according to all we have found on the numbers and the tags this is a 1958,i will get the title in hand and see what it has to say also,i believe my brother was mistaken in its year. thanks for all your input!

i am sellinfg this for my brother,he is supposed to bring me the title for it today and i can double check what it has to say,then we will know what it is.

one is a 35-47 ford flathead v-8 fuel pump and the other fits dodge-chrysler-desoto-plymouth etc cars and trucks.they have been sitting on a shelf for a lot of years but i believe them to be new. still look good but not sure if the diaghrams are dried out or not. the arms move freely and feel as they should. 55 dollars each plus shipping.

guessing mid fifties ford two barrel carb. 1 1/16 throats,two adjuster screws on the base are gone. it has a lot of shelf life and use showing,definetely needs a rebuild.. 65 dollars or best offer plus shipping. i believe it will fit in a medium flat rate box so about 14 dollars for shipping. cast ECG5 on the side of the bowl.

new old stock 37-41 ford flathead V-8 coil. box is a bit rough but the coil looks like brand new. DSM brand. 50 dollars. i can ship if necessary but buyer pays shipping.

I bought this project a while ago but now cant afford to finish it. it needs interior work as the pics show but I believe most is there for patterns.i bought it without a motor but I bought a motor for it that goes with it. the body is in real good shape except some rust around the windshield which I guess is normal. clear title.this is a safari customs camper.i need 2650 for it as it sits. email with questions or call 563-242-0650. leave a message and number if I am not in the shop.i might take partial trades but only old or odd car, truck or motorcycle stuff. this is in Clinton iowa 52732.

I have a set of fender skirts for a dodge or Plymouth. I could use a little info on them as I am not real sure what years they will fit? I believe with the research I have done they will fit 49-51 dodge and 50-52 Plymouth ,possibly Desoto from those years also? if someone could help me out with the exact years they fit I would appreciate it. they have a piece of tape on them that says 50 Plymouth and dodge written in ink. they were for our 50 dodge wayfarer coupe but we sold the car. repops are 325 dollars,i believe these are originals but I cant find any markings on them so I am not sure. they have the patina of originals. no rust issues at all. would like 200 plus shipping if I have to ship them,they can be picked up in Clinton iowa too. .I can take more pics if you need,just PM me with what you would like to see

this would be usable as is or a good candidate for refurbishing. it has some wear and some cracks as the pics show,the splines are good. i have it on auction on ebay for 160.00 plus 25 dollars shipping but would end it if someone here wanted it before it gets bid on. you can email me at memech123@yahoo.com or call 563-242-0650 with any questions. leave a name and number to call if i am not by the phone.

this fenton fuel block seems to have been sent out without the outlet ports being threaded. it doesnt look like its been tampered with or altered. i say new old stock as it couldnt possibly have been used as it is. i have this up on ebay starting at 90 dollars plus shipping but will pull the auction if someone here wants it. you can email me with questions at memech123@yahoo.com or call my shop number at 563-242-0650,please leave a name and number to call if i am not at the phone. it seems like a oddity to have been sent out non threaded! someone may want it as just a conversation piece. you will have to email me for more pics,these are the only ones i could get to download here for some reason.

I have a assortment of cranks,escutchens, and knobs for sale. I know some are 42 ford. some are ??? let me know if you see something you want info on. memech123@yahoo.com

i guess i should also tell you my info says albany illinois,thats where i live,our shop is in clinton iowa just across the mississippi river.

i have a 56 desoto firedome that would be pretty close to fitting your description but i am in clinton iowa,52732. it has some body damage from being in a barn that fell on it in a tornado but is in very rust free condition and runs and drives nicely. email me at memech123@yahoo.com if you would like pics of it and more info on it. thanks,Mike.

we have too many parts,so we are selling some off. email or call with any questions or more pictures. memech123@yahoo.com 563-242-0650. leave a message and number if I am not in the shop. we are in Clinton iowa 52732.

i have a 37 gmc panel truck project for sale but i am in iowa. i am asking 2300 for it. if you want to send me a PM, if interested ,i can send you pictures of it.

this motor and drive line was pulled from a 28 model A roadster.it was ran before being removed and it sounded pretty good for being 86 odd years old. complete motor, trans front, and rear axles. asking 1250 for it all. we are in Clinton iowa 52732.MOTOR HAS BEEN SOLD,STILL HAVE FRONT AND REAR AXLES