George Albright

Guys THANK YOU so much for your help!!! I am sending emails of photos to Carol right now. Sincerely George email gnalbright@gmail.com

OK Guys,the steam car beast is now in Ocala,Fla! ( See enclosed new photos!)AMAZING construction-not a homebuilt. Probably built by a Detroit area styling studio during the late 1930s. Still no real answers on who built it though. SOMEONE in the Detroit area must know its history. Please keep digging! George Albright,Ocala,Fla. email gnalbright@gmail.com cell 352 843 1624

Does anyone know where I can buy a set of 6 Ford Model A 1930-31 hubcaps WITHOUT the Ford script in the middle-ie just smooth in the center. Leads of sellers appreciated! George Albright,Ocala,Fla. email gnalbright@gmail.com cell 352 843 1624<!-- google_ad_section_end --> <!-- google_ad_section_end -->

Does anyone know where I can buy a set of 6 Ford Model A 1930-31 hubcaps WITHOUT the Ford script in the middle-ie just smooth in the center. Leads of sellers appreciated! George Albright,Ocala,Fla. email gnalbright@gmail.com cell 352 843 1624

Dear Friends :I need to have a circa 1950 one car open sprint car trailer hauled or pulled from the Milwaukee,Wisconsin area to Ocala,Fla. in the next 45 or so days. Will pay $250 for the haul/pull. Trailer only weighs several hundred pounds. It is 178 inches long including the tongue,80 inches wide from outside of the tire to outside of the tire,and the tires are about 28 inches high. Should be an easy pull with any size car or truck. Leads appreciated. Thanks,George Albright,Ocala,Fla. Email; gnalbright@gmail.com cell 352 843 1624 10 AM to 9 PM

Go to Ebay. Once on the home page,go to Ebay Motors. Once in Ebay Motors ,go to parts-vintage. Once in vintage parts,type in the search word brass. There are always several early steering wheels on there including a guy who sells a nice repro one with brass spider and wood wheel. Good Luck! George Albright,Fla.

Dear Friends I bought this 1900-30 motorcycle or small car transmission from the Jim Lynch collection in Canton Ohio,1996. I have never been able to ID. Looks like a motor cycle transmission to me. The small lever clicks twice. I guess that means its a 2 speed? Also I guess it is missing the clutch assembly on one side to shift it? I know early cars,but not early bikes. Thanks! George Albright,Ocala,Fla. email: gnalbright@gmail.com cell 352 843 1624<!-- google_ad_section_end -->

Dear Friends I bought this 1900-30 motorcycle or small car transmission from the Jim Lynch collection in Canton Ohio,1996. I have never been able to ID. Looks like a motor cycle transmission to me. The small lever clicks twice. I guess that means its a 2 speed? Also I guess it is missing the clutch assembly on one side to shift it? I know early cars,but not early bikes. Thanks! George Albright,Ocala,Fla. email: gnalbright@gmail.com cell 352 843 1624<!-- google_ad_section_end -->

Dear Friends I bought this 1900-30 motorcycle or small car transmission from the Jim Lynch collection in Canton Ohio,1996. I have never been able to ID. Looks like a motor cycle transmission to me. The small lever clicks twice. I guess that means its a 2 speed? Also I guess it is missing the clutch assembly on one side to shift it? I know early cars,but not early bikes. Thanks! George Albright,Ocala,Fla. email: gnalbright@gmail.com cell 352 843 1624

I have gone to the Detroit Public Library,the Gilmore Museum,and the AACA Library in Hersey-nothing! SOMEONE in the Detroit area must know who built this beast! George

Dear Friends Here are some more photos of the Harris Steam Car. George Albright,Fla. email gnalbright@gmail.com cell 352 843 1624 PS I have lots more photos of the inside and outside of the car. Please request them to my email gnalbright@gmail.com George

Yes I would sell the car for $25,000 US,and arrange shipping to any port in the Eastern USA. The steam engine and boiler were taken out in the 1980s and used in another steam car. The original Stanley condensor is still in the front of the vehicle. It is black and looks like a radiator in front of the car. This car can be made to run with a steam or gas engine,as there is plently of room to reinstall a bolier and steam engine,or a 1920s,1930,or 1940s straight 6 or 8,or V8 gasoline or diesel engine and transmission,driven down to a rear axle,like a 1930s or 1940s bus. Please email me your email address to gnalbright@gmail.com and I will foward you lots more photos of the inside and outside. Sincerely George Albright,Ocala,Fla. cell 352 843 1624

OK Guys got a little more info on the beast! Spoke with Dan Sheler of Mi. who owned the car in the 1980s. He read about the car in the Detroit paper in 1963,when he was in Detroit for awhile,working for Ford,doing the clay models of the Mustang. He went over to Mr. Hariss (or Harris) house and spoke with him about the car,and inspected it. He said the owner was quite proud of the car and wanted to show it off. Sheler went to see the car in around 1967 and found that Harris or Hariss had died and the car was gone. Then in the late 1960s or early 1970s,the attached photo below of the car showed up in one of the steam car magazines that was published at the time,offering the car for sale. I got this from Sheler. He copied it out of the steam car magazine at the time.He thinks there is a brief history of the car as text in the steam car magazine ad. Obviously this photo is of Harris Hariss in the 1940s or 1950s showing off the car. The owner of the car at the time must have gotten this photo from the family when they bought the car from the Harris Harris estate. Notice it has a bumper on it in this photo,which is missing now. If any of you have or know some one who has 1960s and 1970s steam car magazines,such as Art Hart,please ask them to go tru their magazines from approx. 1967-1975 and see if the ad with this photo is in one. Maybe in the text is referenced who actually built the car. Thanks guys. Keep digging! George Albright email gnalbright@gmail.com cell 352 843 1624

OK Guys got a little more info on the beast! Spoke with Dan Sheler of Mi. who owned the car in the 1980s. He read about the car in the Detroit paper in 1963,when he was in Detroit for awhile,working for Ford,doing the clay models of the Mustang. He went over to Mr. Hariss (or Harris) house and spoke with him about the car,and inspected it. He said the owner was quite proud of the car and wanted to show it off. Sheler went to see the car in around 1967 and found that Harris or Hariss had died and the car was gone. Then in the late 1960s or early 1970s,the attached photo below of the car showed up in one of the steam car magazines that was published at the time,offering the car for sale. I got this from Sheler. He copied it out of the steam car magazine at the time.He thinks there is a brief history of the car as text in the steam car magazine ad. Obviously this photo is of Harris Hariss in the 1940s or 1950s showing off the car. The owner of the car at the time must have gotten this photo from the family when they bought the car from the Harris Harris estate. Notice it has a bumper on it in this photo,which is missing now. If any of you have or know some one who has 1960s and 1970s steam car magazines,such as Art Hart,please ask them to go tru their magazines from approx. 1967-1975 and see if the ad with this photo is in one. Maybe in the text is referenced who actually built the car. Thanks guys. Keep digging! George Albright email gnalbright@gmail.com cell 352 843 1624

According to motorcycle collector Mark Pospisil,the motorcycle transmission has been identified as for a big twin Harley.They started using this style gearbox in 1936. The clutch is 1940 or earlier. I do not know how long after 1940 this same box was used with a post 1940 style clutch. Hope this helps the bidders. George

According to motorcycle collector Mark Pospisil,the motorcycle transmission has been identified as for a big twin Harley.They started using this style gearbox in 1936. The clutch is 1940 or earlier. I do not know how long after 1940 this same box was used with a post 1940 style clutch. Hope this helps the bidders. George

Below are photos of my auctions of the 1900-04 car project and parts on Ebay,listed under Ebay poster name "invision2000" The word "horseless" is in each auction title for easy search purposes. Photos of each auction avail. by email; gnalbright@gmail.com George Albright

SORRY! Poster name is invision2000 NOT invision 2000 George PS I have now fixed that in the text of the earlier thread

Attached are photos of my 1900-04 car project and parts I listed on Ebay under Ebay poster name"Invision2000" Photos avail by email to me at gnalbright@gmail.com George Albright PS The word "horseless" is in the title of every auction,for easy search purposes.

PLEASE help me ID this trans. so I can represent it correctly! If you know,what bike and years it came from please email me at gnalbright@gmail.com THANKS! George Albright .Up for Ebay auction # 260516338832 is a circa 1920-39 motorcycle trans I have had since 1994 when I bought it with 3 trailers of brass era horseless carriage and motorcycle motor cycle parts from the Jim Lynch collection in Canton Ohio. I took photos of it to Hershey in 1995 and one knowledgeble dealer told me it as either a 1920s or 1930s Harley Davidson or Indian transmission. I don't remember what he said,but I put it in storage from 1995 until now. Sorry no other motorcycle parts! My knowledge of motorcycles is limited;thus I am setting it as a no reserve auction and let the market determine the price. The transmission is stamped on the bottom "121 35" Thus this might be transmission #131 from 1935. I simply don't know. Could be for a 1920,1921,1922,1923,1924,1925,1926,1927,1928,1929, 1930,1931,1932,1933,1934,1935,1936,1937,1938,1939 bike.The inside sprocket is not original and was used to drive block chain,not regular chain like the outward two sprockets. I removed the transmission from a 1903 Conrad automobile,where it had been used as the transmission in that car. Other than removing the non original most inside sprocket,the transmission,and clutch assembly looks good and complete. The case does not have any visible stress cracks. Stored inside since at least 1940! The case itself is 10 inches wide,and the entire assembly is 15 inches if you add the clutch assembly. Outside diameter of the clutch housing at its widest diameter is 7 inches. Looks like its had little use. I suspect this piece is quite rare and valuable,and may even go to something other than a Harley or Indian. You have to be the judge. Shipping is a flat $100 for crating and shipping to the lower 48 states.Please pay by check or wire. Email questions or request for photos to me at gnalbright@gmail.com Good Luck! George Albright,Ocala,Fla. ---------- Forwarded message ----------<!-- google_ad_section_end -->

PLEASE help me ID this trans. so I can represent it correctly! If you know,what bike and years it came from please email me at gnalbright@gmail.com THANKS! George Albright Up for Ebay auction # 260516338832 is a circa 1920-39 motorcycle trans I have had since 1994 when I bought it with 3 trailers of brass era horseless carriage and motorcycle motor cycle parts from the Jim Lynch collection in Canton Ohio. I took photos of it to Hershey in 1995 and one knowledgeble dealer told me it as either a 1920s or 1930s Harley Davidson or Indian transmission. I don't remember what he said,but I put it in storage from 1995 until now. Sorry no other motorcycle parts! My knowledge of motorcycles is limited;thus I am setting it as a no reserve auction and let the market determine the price. The transmission is stamped on the bottom "121 35" Thus this might be transmission #131 from 1935. I simply don't know. Could be for a 1920,1921,1922,1923,1924,1925,1926,1927,1928,1929,1930,1931,1932,1933,1934,1935,1936,1937,1938,1939 bike.The inside sprocket is not original and was used to drive block chain,not regular chain like the outward two sprockets. I removed the transmission from a 1903 Conrad automobile,where it had been used as the transmission in that car. Other than removing the non original most inside sprocket,the transmission,and clutch assembly looks good and complete. The case does not have any visible stress cracks. Stored inside since at least 1940! The case itself is 10 inches wide,and the entire assembly is 15 inches if you add the clutch assembly. Outside diameter of the clutch housing at its widest diameter is 7 inches. Looks like its had little use. I suspect this piece is quite rare and valuable,and may even go to something other than a Harley or Indian. You have to be the judge. Shipping is a flat $100 for crating and shipping to the lower 48 states.Please pay by check or wire. Email questions or request for photos to me at gnalbright@gmail.com Good Luck! George Albright,Ocala,Fla. ---------- Forwarded message ----------

Please see on Ebay my 6 auctions,listed under Ebay poster name "Invision2000" . Includes a 1900-04 authentic car project of an unidentified runabout in the "pre-1939 collector cars for sale catagory" on Ebay,with tiller steering,axles,springs,seat etc. , and with the following listed under the vintage car parts for sale catagory:a circa 1900 body probably off of a buggy,that would make a super horseless carriage,an unidentified 1900-04 super neat cast iron front axle. and a transmission band assembly and a pair of rear wheel brake band assemblies off of a 1903-08 Cadillac,but could be used on any early car.All auctions are no reserve.Photos also avail. from me by email. George Albright,Ocala,Fla. email gnalbright@gmail.com

Please see on Ebay my 6 auctions,listed under Ebay poster name "Invision2000" . Includes a 1900-04 authentic car project of an unidentified runabout in the "pre-1939 collector cars for sale catagory" on Ebay,with tiller steering,axles,springs,seat etc. , with the following listed under the vintage car parts for sale catagory:a circa 1900 body probably off of a buggy,that would make a super horseless carriage,an unidentified 1900-04 super neat cast iron front axle. and a transmission band assembly and a pair of rear wheel brake band assemblies off of a 1903-08 Cadillac,but could be used on any early car.All auctions are no reserve.Photos also avail. from me by email. George Albright,Ocala,Fla. email gnalbright@gmail.com

Dear Bryan I am TRULY humbled for you taking all of the time to do this research! I just spoke to Dan Sheler,who owned the car in the 1980s,but went to Harris Hariss? house in 1963 to view the car and speak with him. Sheler provided the photo and info for the Clark/Kimes book,shown at the beginning of this posting. Sheler did say he went back to see Hariss Harris? several years later,and that he had died. Thus you may be on to the right guy! I believe it is important to put the history with this car,as we are merely stewarts of them for future generations. This research only happens with our old car community working together. Plus its fun! Thanks again. George PS KEEP DIGGING!

There are several sets of repro Ford A lights just like this on Ebay right now,reasonable. Don't know who mad them. Thanks also for the tip on the knockoff hubcaps! Would like to find a real set of 19 inch knockoff wheels and hubs for this car also. Anyone got any? Leads?Geo.