Scrapper Posted July 18, 2018 Share Posted July 18, 2018 How does one reach the screws that hold the clips in place. I took off the top trim piece but under it is molded steel body! Link to comment Share on other sites More sharing options...
Barney Eaton Posted July 18, 2018 Share Posted July 18, 2018 With the top plate off the top of the windshield, you can flex the plastic to get to the one screw.........when you install the new visor clips put some sort of washer under the screw so it will not pull thru the plastic. Link to comment Share on other sites More sharing options...
NCReatta Posted July 18, 2018 Share Posted July 18, 2018 50 minutes ago, Barney Eaton said: With the top plate off the top of the windshield, you can flex the plastic to get to the one screw.........when you install the new visor clips put some sort of washer under the screw so it will not pull thru the plastic. No, if you take the top piece off the windsheild header you can't get to that screw. To properly do it, you have to remove both sun visors, the screw at either end of the interior colored header panel, and the screw holding each visor clip in. Then the whole interior header panel will drop down and you can get to the interior screw on the back of the header panel. 1 Link to comment Share on other sites More sharing options...
DAVES89 Posted July 19, 2018 Share Posted July 19, 2018 1 hour ago, NCReatta said: No, if you take the top piece off the windsheild header you can't get to that screw. To properly do it, you have to remove both sun visors, the screw at either end of the interior colored header panel, and the screw holding each visor clip in. Then the whole interior header panel will drop down and you can get to the interior screw on the back of the header panel. That's how I remember it as well. The last guy in didn't pay attention and cracked my header panel. Still looks okay, but is fragile so be careful. 1 Link to comment Share on other sites More sharing options...
Scrapper Posted August 21, 2018 Author Share Posted August 21, 2018 Thanks for the help guys Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now