Guest oldcarfanatic41 Posted April 22, 2012 Share Posted April 22, 2012 Hello, I am new to this forum, and need help with information on finding someone to rebuild a roof for a 1926 Buick Sedan. I recently purchased this car and it was restored approx 25 years ago. Sadly, that person did not care enough once it was restored to keep it inside. When I bought it the roof had deterorated and now it must be restored. As for the rest of the car, super condition, I started it and drove it and have been cleaning the carburator, checking all the wiring, and well everyone knows what you have to do when you bring home such a sweet find! If you have any suggestions or referrals to a shop that can rebuild the wooden roof I would greatly appreciate your input. I would like to be able to drive this car with a new roof in our local parade in April 2013. Link to comment Share on other sites More sharing options...
jscheib Posted April 23, 2012 Share Posted April 23, 2012 First,Welcome to the forum. I hope you will consider joining the BCA. There are a number of Buick people in your state, and I am sure someone can help you locally, and for sure some in Texas. I think you are looking to replace the wood in the roof, as well as the covering, and it looks like you have a full year to solve the problem.One word of caution. If the roof has deteriorated so badly that all has to be replaced, what about the interior? And also there may be water into the major wood framing that could be more problems, I would think. But you said it was in "super condition". Please feel free to provide more details on the car and what part of Oklahoma, and hopefully some photos. This will help others to guide you. I could offer some solutions here on the east coast, but I do not believe you want to go this far for repairs.John Link to comment Share on other sites More sharing options...
michaelod Posted April 23, 2012 Share Posted April 23, 2012 Depending on the extent of the damage, it would seem that you will need someone with considerable woodworking experience and the required complement of tools to take on this task. This is not a project for the faint-of-heart and you will need to do some investigation to determine exactly how far the damage to the wood has progressed. This kind of work is generally rather expensive due to the amount of labor that is involved in making proper repairs. Keep in mind that you will probably at a minimum require interior work such as a new headliner due to the fact that the existing one will have to come down in order to repair/replace the wooden ribs in the top. In addition you will need to replace the exterior cobra grain soft top and trim as well. You will probably be dealing with two specialized trades; wood working and automotive upholstery. Thanks, Link to comment Share on other sites More sharing options...
Guest oldcarfanatic41 Posted April 29, 2012 Share Posted April 29, 2012 Thanks for the replies! After doing a little research, it is exactly as you state, you certainly know your stuff! I began to dissassemble the roof, (the really bad part was the driver side rear corner in which the roof was completely gone about 12"x12", almost as if a squirrel had chewed through the roof.) I removed the covering, and the frame of the top is obviously in really bad shape. I have made a few calls and came up empty with the information that I was looking for. You called it right, moisture has caused the wood to deteriorate and it too will have to be replaced. The interior (seats) are still in good condition, but it is the overall condition of the frame that has me worried. I am taking pictures, cataloging the pieces as I removed them and numbering them. I am at a loss as to where to find more information on replacing these pieces of the frame. I will continue to look for someone with superlative wood working experience who can recreate these pieces. Will update this as it progress's, obviously the set goal to have it ready in a year has now gone out the window, perhaps 2015!! I welcome all and any who have gone through this process to send out a lifeline to get me through this! Thanks Everyone! Link to comment Share on other sites More sharing options...
Mark Shaw Posted April 29, 2012 Share Posted April 29, 2012 Fanatic, The local HCCA club has some great contacts in Oklahoma City. Send me a PM and I will put you in touch with them. Their director has a 27 Buick roadster that has been on several BCA PreWar Division tours.... Link to comment Share on other sites More sharing options...
Guest 1922 Buick Posted April 30, 2012 Share Posted April 30, 2012 oldcarfantic41,Join the Yahoo 1927 Buick Group, it's free. Great bunch of people who share resources and information.1922 BuickJeff Kearney. Link to comment Share on other sites More sharing options...
jscheib Posted May 1, 2012 Share Posted May 1, 2012 As you have some concern about the basic wood frame, I think you should take a good look at how the door close, or sag. If not, chances are the wood frame is not too bad, I would think.John Link to comment Share on other sites More sharing options...
Guest 27buickrdst Posted May 3, 2012 Share Posted May 3, 2012 Hi:saw your post about getting the top re-wooded on your Buick. There is an excellent craftsman in Cushing Ok that can help you out. Several of the club members in the OKC HCCA club here have used him and have been very pleased with his work. His name is Dennis Francis and he is at 918-225-2250.Randy DekkerOklahoma City27 Buick Roadster Link to comment Share on other sites More sharing options...
Guest David Cewe Posted August 31, 2013 Share Posted August 31, 2013 Hi John, I have a 1926 Buick Master that needs the roof repaired. It's not all that bad, the doors sag about an eight of an inch. Most of the wood is good, except the four corners and the back piece over the rear window. Reading your post to another person, it sounds as though you know a someone in Connecticut that can make these repairs. Do you have their contact information? If you have any questions, I can be reached at 203-376-2307. My name is Dave. Thanks. Link to comment Share on other sites More sharing options...
Guest JamesG Posted October 16, 2014 Share Posted October 16, 2014 Hi I have 1926 buick 2 door I need to replace roof material. My question is what do I use as replacement material and hardware thanks. Link to comment Share on other sites More sharing options...
Leif Holmberg Posted October 16, 2014 Share Posted October 16, 2014 Always remember to tell what model you have when asking for help or parts when you own a Buick,whatever the year is. Standard ser 20? or Master ser.40? ser.50? That will help a lot for those people who wants to help you.Leif in Sweden. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now