Guest TOM RADWILL Posted November 27, 2010 Share Posted November 27, 2010 Can anybody supply, front wheel bearings, inner and outer, for a 1927 Chrysler Model 70.They are Shafer brand, concave roller bearings.Looking for NOS or known replacements Link to comment Share on other sites More sharing options...
hwellens Posted November 27, 2010 Share Posted November 27, 2010 This my helpThe Timken numbers are:Front wheel inner - Cone 14132, Cup 14282Front wheel outer - Cone - 1380, Cup 1329 Link to comment Share on other sites More sharing options...
mribbich@wi.rr.com Posted November 29, 2010 Share Posted November 29, 2010 The Shafer numbers are inner B6131-B6283, Outer A755-744. If the 1329 is a replacement I have two of them. Hope this helps. mribbich@wi.rr.comMarv. Link to comment Share on other sites More sharing options...
Bill Boudway Posted December 7, 2010 Share Posted December 7, 2010 Hi Folks,Would these numbers also work for a 1926 Chrysler model G-70?Thanks Link to comment Share on other sites More sharing options...
Bill Boudway Posted December 7, 2010 Share Posted December 7, 2010 Hello, again,I forgot to give you the name of my bearing supplier.Andy Fuhrman. Andy.Fuhrman@kaman.comHe's an antique auto guy with lots of patience and skill at finding the correct bearings.Good luck, Link to comment Share on other sites More sharing options...
keiser31 Posted December 7, 2010 Share Posted December 7, 2010 Don't know if this helps, but the Chilton number is 7010 for the front inner bearing and 6370 for the front outer bearing. They interchange with 1927 Model 60 Chrysler and 1928 Model 62 and Model 72. They will also interchange with 1928-29 Model 65 and Model 75. Link to comment Share on other sites More sharing options...
Guest TOM RADWILL Posted December 19, 2010 Share Posted December 19, 2010 Thank you for the input. I was able to acquire all replacement roller cones and cups, from Valley Auto Parts in Colorado. Link to comment Share on other sites More sharing options...
Guest safetyray Posted October 17, 2012 Share Posted October 17, 2012 i saw your post thogh its old i wanted to ask a question of you what do you use for the fabric u joints on ea end of the drive shaft and how is the assembly done washers ect. ? i have purchased some but the keep ripping thanks Ray Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now