Display of AACA Medallions

[Jim66GT]

Hey Guys, I would like to know if there is a special way or location to mount my 1st Junior medallion. I have a 66 Mustang GT (has fog light bar), and the 2 small holes aren't going to line up with anything. Any help is greatly appreciated. Thanks, [color:"blue"] Jim

[Jay Wolf]

AACA sells a little bracket that will bolt to the licence plate or something similar <img src="http://forums.aaca.org/images/graemlins/cool.gif" alt="" />

http://members.aaca.org/cimage/badge%20holder%20lg.jpg

[carbdoc]

66GT,

Congrats on the 1st Junior.

I mounted my "HPOF" and "AACA Touring" medallions through the horizontal or vertical grille slots of my '60s - '70s Mopars, using the brackets which Jay Wolf recommended in conjunction with long #4-40 brass screws and nuts. I simply cut the mounting protrusion off and used the now-oval bracket as a backing plate on the inside of the grille, then ran the screws through both the medallion and the backing plate and installed the nuts. Once secured, I have had no problems with them shifting up, down or sideways.

Jeff Dreibus

[novaman]

For my mom's car and mine(both HPOF) I made two plexiglass ovals 1/16" larger then the badge and used them behind the badge and on the backside of the grille.

[ex98thdrill]

Another method for the people living where they only have one state license plate would be to mount the badge on a license plate blank and put it on the front of the vehicle where the second license plate would normally go.