BUKE Posted April 19, 2006 Share Posted April 19, 2006 Hi.I sure can use some help on my 55 roadmaster.I have a 322 eng.and i am having a very hard time keeping a set of point's in it. Thay burn out in no time.I have set them at 16 19 no good thay last a little longer if i run them at .21. I have time the eng and still no good.any help will be greatly appricated. thank you buke Link to comment Share on other sites More sharing options...
old-tank Posted April 20, 2006 Share Posted April 20, 2006 bukeBuy quality points like from NAPA, always change the condensor, be sure all connections are tight and clean, try a replacement coil. Also be sure that the ballast resistor has not been bypassed.Willie Link to comment Share on other sites More sharing options...
The Old Guy Posted April 20, 2006 Share Posted April 20, 2006 Have you checked the voltage at the points? It should be 8 volts. There is a resistor that should reduce the voltage. If it checks 12 volts, that is the reason your points are frying. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now