Mark Shaw Posted April 2, 2006 Share Posted April 2, 2006 Please advise if anyone has spares or a good source for torsion springs as shown in the photo. Thanks,Mark Shaw Link to comment Share on other sites More sharing options...
Dandy Dave Posted April 3, 2006 Share Posted April 3, 2006 Hello again Mark, I was looking at the springs and though you might be able to make them from a hay rake or hay baler pick up tooth. you would have to reshape them some to make them work, Go to a farm machinery dealer or farm machinery scrap yard and look at what they have. I wish I had some originals for you but do not. Good Luck, Dave! Link to comment Share on other sites More sharing options...
Mark Shaw Posted April 4, 2006 Author Share Posted April 4, 2006 Dave, Thanks, but we already have the correct wire to make springs. I just thought somebody might have a ready-made source for these.Mark Shaw Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now