Switch rebuild

[A Big Green Car]

I need the headlight switch for my '67 Newport Custom either rebuilt or replaced. Now, before you tell me that a headlight switch is fifteen bucks at Vato Zone, I need to tell you that they don't have this switch: it's a toggle.

I need to know if there's someone in the So. Cal area that rebuilds electric switches like this, as neither Laysons, consumer auto parts stores nor any Chrysler dealership I've called has a replacement. (As the last place I called said to me, "It's history. No one makes it anymore." And that was a dealership that was recommended to me because they've been known to perform miracles.)

Any and all help will be appreciated. Thank you.

[HarryJ]

Green Car............I have bought out several auto parts houses in my day, with these came several light switches. If you have a part No. for the part you are looking for I'll check what I have.

[Guest imported_BaronvonR]

If you have the part number try www.partsvoice.com this is a good source for MoPar parts searching.

[Guest richard denis]

you can get a switch for your 67 chrysler call 1 678 792 7839 firestone collectibles they have 7 of them.rich

[marty14]

#2809045 1967-68 C bodies 65.00 NOS or 45.00 used

Arizona Parts

[finsruskw]

That number also cross references to NAPA (Echlin) HL6118

I believe I have one.

Can you post a photo of ypours , front and back??

Dave S

[Guest Jim_Edwards]

I need the headlight switch for my '67 Newport Custom either rebuilt or replaced. Now, before you tell me that a headlight switch is fifteen bucks at Vato Zone, I need to tell you that they don't have this switch: it's a toggle.

I need to know if there's someone in the So. Cal area that rebuilds electric switches like this, as neither Laysons, consumer auto parts stores nor any Chrysler dealership I've called has a replacement. (As the last place I called said to me, "It's history. No one makes it anymore." And that was a dealership that was recommended to me because they've been known to perform miracles.)

Any and all help will be appreciated. Thank you.

Is this the switch you need?

Jim

[Guest Jim_Edwards]

I just realized all who have posted to this thread recently, including me, are now fully qualified to dawn a "Dunce Cap." This thread is five years old and I sure as hell hope that switch issue was resolved long before now.

Jim

[HarryJ]

Whew!..................I sold all my auto parts three years ago.