NicksGarage Posted May 12, 2022 Share Posted May 12, 2022 (edited) SOLD This motor has been outside for years! Cylinder Block is cracked on the outside, plenty of good parts I'm sure, OR... make a massive coffee table out of it. $500 Englewood, CO Thanks, Nick Edited February 24 by NicksGarage Title Change (see edit history) Link to comment Share on other sites More sharing options...
roysboystoys Posted May 12, 2022 Share Posted May 12, 2022 I had a 29 Hudson , cracked in the same place. I gently tapped it back in place and epoxied it. Ran it over 20,000 miles , no leak . It's not a pressurized system. Rings and valves were available from Egge machine. 1 Link to comment Share on other sites More sharing options...
paulrhd29nz Posted May 13, 2022 Share Posted May 13, 2022 I’m guessing it’s stuck ? Link to comment Share on other sites More sharing options...
NicksGarage Posted May 13, 2022 Author Share Posted May 13, 2022 3 hours ago, paulrhd29nz said: I’m guessing it’s stuck ? I'm sure it is, I haven't tried to turn it. Link to comment Share on other sites More sharing options...
Mefistofele Posted July 3, 2022 Share Posted July 3, 2022 On 5/12/2022 at 9:31 PM, NicksGarage said: This motor has been outside for years! Cylinder Block is cracked on the outside, plenty of good parts I'm sure, OR... make a massive coffee table out of it. $500 Englewood, CO Thanks, Nick Hello Nick, can you sell only few parts?I could be interested for the whoole motor but I live in Italy and It should be more expensive the shipping than the motor.Otherwise Im interested mainly for the infeed fuel system ,oil level gauge an others small parts. Can you sell separately? Do you have others parts for Hudson super six? Thank you Regards Link to comment Share on other sites More sharing options...
NicksGarage Posted July 6, 2022 Author Share Posted July 6, 2022 On 7/3/2022 at 2:41 AM, Mefistofele said: Hello Nick, can you sell only few parts?I could be interested for the whoole motor but I live in Italy and It should be more expensive the shipping than the motor.Otherwise Im interested mainly for the infeed fuel system ,oil level gauge an others small parts. Can you sell separately? Do you have others parts for Hudson super six? Thank you Regards Hello Mefistofele - I am unable to send you a message, happy to sell you the parts. would you like to message me or email me with an offer? Also is it the complete intake/carb you want? I'm not clear on "infeed". thanks nick Link to comment Share on other sites More sharing options...
Mefistofele Posted July 6, 2022 Share Posted July 6, 2022 1 hour ago, NicksGarage said: Hello Mefistofele - I am unable to send you a message, happy to sell you the parts. would you like to message me or email me with an offer? Also is it the complete intake/carb you want? I'm not clear on "infeed". thanks nick Exactly, if you have watsapp my n. Is 0039 3397120840 or rsmobile74@gmail.com Link to comment Share on other sites More sharing options...
Miguel Aravena Posted October 31, 2022 Share Posted October 31, 2022 Hi Nick. I am interested in this engine for my car. Still do you have for sell this engine? I am Miguel Aravena from Chile Please, can you take contact with me by what´sapp Thank you very much Link to comment Share on other sites More sharing options...
NicksGarage Posted October 31, 2022 Author Share Posted October 31, 2022 4 hours ago, Miguel Aravena said: Hi Nick. I am interested in this engine for my car. Still do you have for sell this engine? I am Miguel Aravena from Chile Please, can you take contact with me by what´sapp Thank you very much Yes Miguel, I still have this motor. I can discuss on WhatApp tomorrow. Thanks- Mike Link to comment Share on other sites More sharing options...
NicksGarage Posted June 8, 2023 Author Share Posted June 8, 2023 Any offers for this motor? Link to comment Share on other sites More sharing options...
dedietrich Posted September 21, 2023 Share Posted September 21, 2023 Hi is the engine still available? Need the marvel carb water pump and distributor cheers Link to comment Share on other sites More sharing options...
Richard barra Posted February 24 Share Posted February 24 Hello Nick , is the engine still available? Link to comment Share on other sites More sharing options...
NicksGarage Posted February 24 Author Share Posted February 24 This motor has been sold, thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now