51UKChieftan Posted June 2, 2021 Share Posted June 2, 2021 Hi Guys, I recently purchased a NOS water bottle to replace the one on the car in the hope that it would solve the issue of the washers not working but unfortunately, it didn't. There is suction at one of the pipes and there is a small amount of resistance at the washer control, i am assuming this is kind of indicating there is pressure there but i could be wrong. Any pointers in the right direction would be most helpful. Thanks Joe Link to comment Share on other sites More sharing options...
GARY F Posted June 2, 2021 Share Posted June 2, 2021 First check the nozzle end to see if it is blocked. Do you hear the pump ticking when you press the wash button.? Link to comment Share on other sites More sharing options...
51UKChieftan Posted June 3, 2021 Author Share Posted June 3, 2021 Hi Gary, Thanks for the reply. I have done what i consider to be the basic checks with no luck. The system on my 51 is a vacuum so i am assuming there wouldn't be any ticking. Regards Joe Link to comment Share on other sites More sharing options...
PhilAndrews Posted July 4, 2021 Share Posted July 4, 2021 I put a (rather crude) drawing and description on my thread, based upon rebuilding mine. Primarily mine had bad vacuum leaks from perished and hardened rubber components. Phil Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now