ArticiferTom Posted September 8, 2020 Share Posted September 8, 2020 (edited) Getting ready to remove to repair mine in UF truck these are crosses I know of . Want to be ready if needed . Thanks all . May even just put a good one on and spare mine . Thanks Tom Edited September 8, 2020 by ArticiferTom spelling (see edit history) Link to comment Share on other sites More sharing options...
DFeeney Posted September 9, 2020 Share Posted September 9, 2020 Hello Tom, I believe I have a Q and a U steering box. I am 40 miles north of Columbus, Ohio. Let me know if you can't find one. thanks, Don 1 Link to comment Share on other sites More sharing options...
ArticiferTom Posted September 13, 2020 Author Share Posted September 13, 2020 Thanks Don and Dave . At moment I am not having to do any thing . Per write up in Tech forum . was able to reduce slack back to it's manageable 3/4" from 4-1/2 " . The problem was feeling the adjustment . By disconnecting the drag link from pitman , was able to feel each adjustment in pitman movement . and wheel . So work it out . I will in future be chasing down one because it is worn equal in worm mesh . I also found a number on casting . Do not know if you have them on yours , curious .. C18358 or B ,not sure on end ,was using mirror . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now