palbuick Posted December 16, 2002 Share Posted December 16, 2002 I recently purchased a reverb unit and have no instructions for installation.Any one have anything will settle for copy of instructions.ThanksJim Schilf / palbuick@aol.com Link to comment Share on other sites More sharing options...
rocketraider Posted December 17, 2002 Share Posted December 17, 2002 What kind of car? GM used a couple of different wiring schemes for reverb units over the years. I can help you with Olds and Pontiac (which are different from each other ). Not sure which one Buick used.1st thing I need to know is: does it incorporate a fader control and separate on-off switch (Olds type) or does it have a 3-position switch (front speaker only-reverb OFF; both speakers on- reverb ON; rear speaker only- reverb OFF- Pontiac type)?Neat option to have, except when you hit a bump and hear the sproing noise from the reverb amp! Link to comment Share on other sites More sharing options...
palbuick Posted December 17, 2002 Author Share Posted December 17, 2002 Hi RocketraiderThanks for the response.This unit is in the original box from Oldsmobile and marked 64. Also written on the box is NoSpeakers.From inspection this unit seems to be new. No cut wires, and has a dash switch.Will have to check on switch and see what kind it is.I don't know what I will do , Sell or keep it. Might use it in my 66 Cat.I will let you know abour switch tomorrow, Jim Schilf / palbuick@aol.com Link to comment Share on other sites More sharing options...
Bill Stoneberg Posted December 17, 2002 Share Posted December 17, 2002 Jim,You need to keep it and install it.That way when you listen to the 8 track tapes, they will sound like you are in a concert hall.I used to love those things except when the people talked. Link to comment Share on other sites More sharing options...
palbuick Posted December 17, 2002 Author Share Posted December 17, 2002 RocketraiderThe unit box has an Oldsmobile accessorie part number 982313, and marked on the box in pencil is 64 olds.It has an on-off switch.If you have a instruction sheet I would appreciate a copy.Thanks for help.Jim Schilf / palbuick@aol.com Link to comment Share on other sites More sharing options...
rocketraider Posted December 18, 2002 Share Posted December 18, 2002 I can send you a copy of the wiring diagram and schematic from the 64 shop manual. E-mail me privately with a mailing address. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now