Wanted: 1936 Buick 40 (also Olds, Pontiac) Tail Light Parts

[Bloo]

Wanted: 1936 Buick 40 (also Olds, Pontiac) Tail Light Parts

 

I need one lens, two trim rings, and the casting that holds the license plate bracket. The lens and ring were also used on 1936 Oldsmobile and 1936 Pontiac. These parts may have been used on some Buicks back to 1934 or so. The lens is marked "Oldsray Buray Telray Stimsonite" It measures 3-3/16 to the outer edge.

 

 

The license casting has a different number in the Pontiac book compared to Buick. I don't know why. I figured maybe the Buick version didn't have the hole to mount the emblem, but a whole Buick tail light assembly sold in these forums in 2009 had the hole. It sure looks like the same part to me.

 

Here is a broken one... it should be much taller.

 

 

And here is the whole light that was sold in these forums in 2009, showing what an unbroken casting looks like:

 

 

Let me know what you have available. Thank you.

 

 

[Buick35]

Hi,I have an extra tail light lense and bezel from my 35 Buick if it would work for you. The bezel has a small ding in it but not too noticeable if put on the bottom. $25 plus shipping? from Fl.32927.Thanks,Greg.

[Bloo]

Hi Greg,

 

That isn't the one I am looking for (notice the 2 mounting screws), but thank you for the kind offer.

[Buick35]

no problem,you're welcome.

[John Bos]

Hiya,I  know  this is an old posting, have you found  taillights yet, .....cheers John 

Edited June 5 by John Bos
Erased email (see edit history)