Sign in to follow this  
rjp

wanted 11A part

Recommended Posts

Looking for a good 11A ignition toggle switch or info on where to have one repaired . I think several years are the same. Thanks

Share this post


Link to post
Share on other sites

Drawing #33739 lists that switch can be used for 11A & B, ignition and lighting switch.  Plus can be used to replace the Series 10B & C switches. So you might be able to use a Ser 10 switch  if you had to ?

 

BTW, they can be removed and opened to clean the contacts, if that's all that's wrong. If you coat the cleaned contacts with an electrician's anti corrosion paste, such as  Gardner-Bender's "Ox-gard",  it will keep the contacts clean much longer.  

 

https://www.acehardware.com/departments/automotive-rv-and-marine/fluids-and-lubrication/lubricants/30202

 

Paul

Share this post


Link to post
Share on other sites

Thanks

Is a 10 b&c just as hard to come by?

 

 I will take it out some time this week to see if the body is broke or not. Thanks again

Share this post


Link to post
Share on other sites
42 minutes ago, rjp said:

Thanks

Is a 10 b&c just as hard to come by?

 

 I will take it out some time this week to see if the body is broke or not. Thanks again

 I don't know as I've never had to look for a switch. I was lucky to be able to open and clean them, then "goop" them with Ox-Gard.

 

But 10B & C being possible interchanges with 11A & B may add more possibility of finding a usable switch if you can't fix yours.

 

Paul

Share this post


Link to post
Share on other sites

Ok thanks Paul. I was able to take it a part and clean it and it worked good. Thanks again

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this