MochetVelo Posted August 7, 2019 Share Posted August 7, 2019 I'm replacing the ring gear on my '16 Overland. The teeth on the new gear have a taper on one side. Should this taper be on the front of the gear (see illustration of the engine)? I assume that the Bendix on the starter drive pushes outward to engage the ring gear? Phil Link to comment Share on other sites More sharing options...
Restorer32 Posted August 7, 2019 Share Posted August 7, 2019 Yes if the Bendix pushes out. No if the Bendix is normally out and pulls in when activated. Try the starter before installing the ring gear. Link to comment Share on other sites More sharing options...
MochetVelo Posted August 8, 2019 Author Share Posted August 8, 2019 I checked the starter motor and the Bendix is normally out and pulls inward to turn the flywheel. I'd just assumed they all pushed outward. Another lesson learned. Phil Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now