56 Buick Posted August 2, 2019 Share Posted August 2, 2019 Hi Attached is a photo of a brake backing plate from the front brake of a Roadmaster 70 series Buick. You can see the backing plate has a round centre hole. My Century, apart from being a smaller car, has a larger square hole allowing the spindle assembly to fit through the square hole. I believe the pictured backing plate is from a '57' Roadmaster but my query is whether the pictured backing plate with the round hole is the same for the 52-56 Roadmasters? In other words, do the 52-56 Roadmasters have the same round hole as oppossed to the larger sqaure shaped hole? Thanks Link to comment Share on other sites More sharing options...
56 Buick Posted August 2, 2019 Author Share Posted August 2, 2019 Here is the photo Link to comment Share on other sites More sharing options...
Fr. Buick Posted August 2, 2019 Share Posted August 2, 2019 According to my books, any 52 to 56 Roadmaster will do you. The center hole will be rectangular, as you said, to fit more of the spindle support. You will be happier with the bigger brakes... Just be sure to keep them adjusted. I do mine every thousand or two miles. 1 1 Link to comment Share on other sites More sharing options...
56 Buick Posted August 3, 2019 Author Share Posted August 3, 2019 Thanks, I thought it would be the 52-56 only but wanted to check. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now