CWigleyjr Posted April 11, 2019 Share Posted April 11, 2019 Hi All, Having an issue with the high pressure line that connects to the A/C compressor. Seems as though the flange is bent and will not pull down to seat the seal. Does anyone know of where I can get a replacement high pressure line ? Is this line the same as would be found on any 1990 Chrysler La baron with the 3.0L -6 ? Please feel free to contact me with any info or advice please at; CWigleyjr47@att.net (603)-481-2599 Thank You, Chet Link to comment Share on other sites More sharing options...
Hemi Dude Posted April 11, 2019 Share Posted April 11, 2019 Yes most likely, but a picture of the compressor with the lines attached because there was more than 1 compressor available and the lines were different. Link to comment Share on other sites More sharing options...
CWigleyjr Posted April 12, 2019 Author Share Posted April 12, 2019 Did the pictures come through. Not very good at this . Link to comment Share on other sites More sharing options...
CWigleyjr Posted April 12, 2019 Author Share Posted April 12, 2019 Trying again on pictures, you may be able to see how the flange is slightly bent on the liquid (lower) line and there’s even a little oil/dye (green) around it. Link to comment Share on other sites More sharing options...
CWigleyjr Posted April 16, 2019 Author Share Posted April 16, 2019 Here are some more pictures of the High Pressure Line. Any help greatly appreciated. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now