CWigleyjr

1990 TC A/C refrigerant Lines

Recommended Posts

Hi All, 

Having an issue with the high pressure line that connects to the A/C compressor. Seems as though the flange is bent and will not pull down to seat the seal. Does anyone know of where I can get a replacement high pressure line ? Is this line the same as would be found on any 1990 Chrysler La baron with the 3.0L -6 ?

Please feel free to contact me with any info or advice please at;

CWigleyjr47@att.net

(603)-481-2599 

Thank You,

Chet

Share this post


Link to post
Share on other sites

Yes most likely, but a picture of the compressor with the lines attached because there was more than 1 compressor available and the lines were different.

Share this post


Link to post
Share on other sites

Trying again on pictures, you may be able to see how the flange is slightly bent on the liquid (lower) line and there’s even a little oil/dye (green) around it.

35781927-1CD9-455B-A52D-A62C84238C36.jpeg

ABFF4D11-C320-411D-98C1-B37E6D1B83E4.jpeg

2F307D5D-CC66-4E8A-842B-2565F928E911.jpeg

Share this post


Link to post
Share on other sites

Here are some more pictures of the High Pressure Line. Any help greatly appreciated.

F95C5727-9E18-4AC3-98BD-6DA0F8FF9BF7.jpeg

93617B56-490B-4445-BF05-5B56A46E7EBE.jpeg

C6290012-34B7-401C-A0ED-CCED1C73A7F9.jpeg

5215C682-7ECF-43FF-8DDA-C834C94CD2B2.jpeg

566A844A-EAAA-46B9-B4FE-542454B59183.jpeg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...