RockinRiviDad Posted February 19, 2019 Share Posted February 19, 2019 Any help is appreciated Link to comment Share on other sites More sharing options...
1965rivgs Posted February 19, 2019 Share Posted February 19, 2019 (edited) No, sender and gauge must be matched Tom Edited February 19, 2019 by 1965rivgs (see edit history) Link to comment Share on other sites More sharing options...
Loren@65GS.com Posted February 19, 2019 Share Posted February 19, 2019 The '63 and '64 units are 30 Ohm . The '65 is 90 Ohm. Because of the Ohm difference they don't interchange from '63/'64 to '65. The sending /pickup unit in the tank must match the gauge in the dash. You need a sending/pickup unit that is 90 Ohm for your '65. Loren 2 Link to comment Share on other sites More sharing options...
RockinRiviDad Posted February 19, 2019 Author Share Posted February 19, 2019 Thx for the prompt replies brothers. I came home with a replacement gauge & the tiny mounting screws off of a 65 for $50 I mention “tiny mounting screws” because (believe it or not) that was my fuel gauge problem…who woulda thunk. Speedo repair shop used longer screws to mount my gauge causing metal mounting tabs in the cluster to separate from circuit card film…most expensive tiny screws I ever bought haha every step I take I find some kinda issue with this build haha Glad it worked out Link to comment Share on other sites More sharing options...
RockinRiviDad Posted February 19, 2019 Author Share Posted February 19, 2019 Any one wanna buy the replacement gauge I came home with haha Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now