ptt Posted October 13, 2018 Share Posted October 13, 2018 My 1990 coupe climate control buttons all seem to light up fine when individually pressed. Also blow air out appropriate positions when pushed. The problem is there is no heat present even when the temperature is set at 90 in the little window. Heater core plugged possibly? Link to comment Share on other sites More sharing options...
DAVES89 Posted October 13, 2018 Share Posted October 13, 2018 I'm betting on the lever behind the glove box disconnected. take out the glove box [held in place by about 10 torx screws and take a look. Link to comment Share on other sites More sharing options...
ptt Posted October 30, 2018 Author Share Posted October 30, 2018 Thats exactly what it was. The plastic clip on the rod has broken. Are these available? I pushed the lever (blend door?) to the right and have heat for this cold season but will have to push it back to the left next Spring if I cant find another plastic clip for that activation rod.... Link to comment Share on other sites More sharing options...
2seater Posted October 30, 2018 Share Posted October 30, 2018 I replaced one several years ago and I found the part in the door lock section of the auto parts store. Similar clips are used to hold the latch and lock rods inside the door. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now