Cord Blomquist Posted November 2, 2017 Share Posted November 2, 2017 Here is the oil pressure regulator from my 1930 Hupmobile H motor. The smaller spring seems to be far too stiff and is consequently allowing the oil pressure to rise too high.Where can I order a replacement spring? Does someone supply a variety so we can find the spring with the right tension?Is there anything else you know of that might affect a regulator like this? The larger spring? The slide mechanism? Link to comment Share on other sites More sharing options...
JFranklin Posted November 2, 2017 Share Posted November 2, 2017 I find a large spring collection at my hardware store, maybe 12 drawers with 3-4 compartments each. try your store. Link to comment Share on other sites More sharing options...
Hupp36 Posted November 2, 2017 Share Posted November 2, 2017 Question, is that setting on the pressure regulator as you removed it from the engine? Link to comment Share on other sites More sharing options...
trimacar Posted November 2, 2017 Share Posted November 2, 2017 The nut and threads suggest to me that this is an adjustable pressure relief valve. I'm no expert on later Hupps, just an old retired Engrinear. My second thought is that the threaded rod is broken, and that the piece you show to the far left in the photo should be the same shaft as the threaded piece to the far right. Does it show a fracture? If so that's your problem. That shaft being all one piece would give you adjustment capability. Good pictures, just hard to diagnose long distance. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now