Jump to content

Supercharging 3800 tech question in Hot Rod Magizine


Barney Eaton

Recommended Posts

November 2016 Hot Rod Magazine a reader ask about adding a supercharger to his 3800 Monte Carlo (page 132)

The response gives some good insite into putting a stock supercharger from a 3800 on a non-supercharged 3800.

This would make a good reference technical response and it would be nice if Ronnie could add it to his page....don't know it that takes permission from HR, 

Maybe it could be linked if the magazine becomes available online in a couple of months. 

It is only 2 pages 

Link to comment
Share on other sites

Good information for anyone with a Series II swap. It isn't that complex on the Series I or pre-Series I from '88-'90, but much of the advice is still valid. The full engine swap is more straightforward but there are still a host of peripheral items that need to be changed/modified plus the ECM modification.

Link to comment
Share on other sites

  • 2 weeks later...

Still, the 4T60 trans is the weak link.   I wonder whether a 4T80 transmission from a 2002 ElDorado might be a viable insertion  - the 2002 ElDorado was an E-platform car.     Here's one article   http://www.3800pro.com/forum/fwd-transaxle-components/37817-3800-swap-4t65-4t80-pt1.html

 

Also, this article gives a little history about our transmissions   http://www.angelfire.com/ca2/34Performance/dohc.html  

 

I have a nice 3.4L DOHC motor here, just alter the cam timing and its basically a 275HP motor.   I wish I had time to play with this stuff more

 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...