TomP Posted December 12, 2015 Share Posted December 12, 2015 (edited) After looking for almost a year this one turned up only 70 miles from home, think these trucks PT 125 are becoming rare.with only about 30 registered with the Plymouth Owners Club. I forgot to mention I live in the UK and not sure if there's another one in stock condition over here, it was imported a couple of months ago from New Mexico where it's spent most of it's life, Produced with the last few hundred trucks in the Los Angeles plant before trucks ceased as a Plymouth Line. Being 75 yrs old it has lost a few bits and pieces some of which my be difficult to find and right now I don't know what is unique to this model and what can be used from other Chrysler products. The list is what's missing. Both hood Plymouth scripts left and right Centre front brightwork from the crank handle hole to the hood sides which I think would be 3 pieces. Headlight chrome bezels 2 Complete speedo. Drive Train + all the ancillaries At present it is with the importer but should have it home in a couple of weeks, think I would be pushing my luck wrapping it in festive paper, will post photos when it arrives. Edited August 28, 2017 by TomP Photobucket replaced (see edit history) 1 Link to comment Share on other sites More sharing options...
keiser31 Posted December 12, 2015 Share Posted December 12, 2015 What a great little truck! 1 Link to comment Share on other sites More sharing options...
TomP Posted December 12, 2015 Author Share Posted December 12, 2015 Thanks John, think I may have to visit the P12 site for advise on the Drive train , great find though. Link to comment Share on other sites More sharing options...
TomP Posted December 18, 2015 Author Share Posted December 18, 2015 (edited) Does anyone know about the correct Hood script which goes along the sides of a 41, I've found this image with a note that states it's 7 1/2" long and is it the same as a 40 without the curve to fit the nose. Never seen an original. Thanks for looking. Edited August 28, 2017 by TomP (see edit history) Link to comment Share on other sites More sharing options...
Guest wings515 Posted July 15, 2016 Share Posted July 15, 2016 Just got back onto this Forum. I got a set from Roberts Motor Parts a while back for my PT81. They were not curved but were easily bent to fit the nose curve. Very good repos. Regards, wings515 Link to comment Share on other sites More sharing options...
TomP Posted July 17, 2016 Author Share Posted July 17, 2016 Thanks for the lead, will give Roberts a try. Link to comment Share on other sites More sharing options...
TomP Posted June 11, 2017 Author Share Posted June 11, 2017 Have made some progress with producing repros for the Hood Emblems, hoping to cast samples in the next couple of weeks. the photos below are of version 1 which wasn't correct and version 2 is at the printers. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now