ArticiferTom Posted July 22, 2015 Share Posted July 22, 2015 Been trying to get hub puller and cannot sort out if trucks ie. Grahams had 2 3/8 x16 and 2 7/16 x16 TPI . My hubs threads OD is 2.350 and at bottom of thread is about 2.240 . Thank you Tom Link to comment Share on other sites More sharing options...
ArticiferTom Posted July 25, 2015 Author Share Posted July 25, 2015 Looks like 2 3/8 x 16TPI is the number info posted in Buy/Sell hub puller thread I started . Link to comment Share on other sites More sharing options...
farrellg Posted August 3, 2015 Share Posted August 3, 2015 Tom, I will check sizes on my pullers today. I have a 30, 31, and 32 truck. Do you know the model of your truck and are front and rear hubs the same size ? This info can help sort this out. Also a friend of mine said they met you in Macungie and that you may need some help with headlights. I may be able to help. Link to comment Share on other sites More sharing options...
ArticiferTom Posted August 3, 2015 Author Share Posted August 3, 2015 Hello George (assuming) . Yes my truck is in my avatar pic a'31 Dodge / Graham the thread are same front and back at 2 3/8x16 tpi . I had purchased a new McMurtry puller already . Put may be interested in an original . Was your friend the owner of the '29 dodge sedan who was looking for a puller and if so did he get the one we found from the vendor . I am looking to swap or buy set of headlights I have the seal beam Guide type on the truck now . I'am in contact with another '31 dodge owner now he saying , they are Twi-lite depressed beam two bulbs and metal not chrome about 9 3/8 or 8 7/8 lens (needed to check ) . Also need to get proper tail light . Link to comment Share on other sites More sharing options...
nearchoclatetown Posted August 4, 2015 Share Posted August 4, 2015 Tom, the guy with the Standard Six was Rich. I'm the fat guy you talked to at DBC tent about your headlights. If your axle threads are 2 3/8 I have a puller, had it there to loan Rich but I never saw him. If you need to use one PM me. doug Link to comment Share on other sites More sharing options...
ArticiferTom Posted August 4, 2015 Author Share Posted August 4, 2015 Thanks for the offer ,but I did get one . Not sure if it was Rich with Blue '29 did not know it as Standard Six . He said his measured 2 1/4" and me and Norm found one on table about 4 or 5 vendors down from your setup. We went back and gave him the vendors card, he was going to find him when we left . Hey , Doug remember the booklet I bought . Well I contacted the guy in back with the other uf-10 pickup , his was only about 200 serial numbers from mine. When I called him Sunday ,he was a bite taken back . He did not know about the article being republished in DBC book . He first words where IT'S Not FORSALE . When I said I already have one he offered to help anyway he could . Claims he has not run truck in 10 years and offered to photo any parts I had questions on ,as none of his photo he has where taken digitally .I think he has had the truck for almost 40 years .This will help me greatly ! Tom Link to comment Share on other sites More sharing options...
nearchoclatetown Posted August 4, 2015 Share Posted August 4, 2015 Killer, most members will help if they can. You need to have your truck ready for next June's Nat'l meet at Budds Creek, NY. George may even be finished with his by then? OOps. Link to comment Share on other sites More sharing options...
ArticiferTom Posted August 6, 2015 Author Share Posted August 6, 2015 Got the pics from Glenn . It definitely helped me disassemble my frozen tire lock and showed me some lights need to get what I saw verified . I pm'ed George on it . On another note with brakes all removed I send every thing to Hagen's in Washington for sleeve and reline . Said about 5-7 working days . Is this Budds Creek something special for Dodges or trucks ? Tom Link to comment Share on other sites More sharing options...
nearchoclatetown Posted August 6, 2015 Share Posted August 6, 2015 Tom, I think the name is Budd's Creek? Whatever it's called it's in northern NJ and that's where the 2016 DB club Nat'l meet will be. If you come to the Hershey meet and Friday night meeting you will learn all about it. Link to comment Share on other sites More sharing options...
ArticiferTom Posted August 7, 2015 Author Share Posted August 7, 2015 Roger on that ! Do not know about Friday nite am going to try and get there Thur or Fri. Did you hear any thing from Rich if he got the hub puller or not. For an original Springfield priced at 45. was pretty good . Link to comment Share on other sites More sharing options...
nearchoclatetown Posted August 7, 2015 Share Posted August 7, 2015 I did not hear from Rich. If you will be at the dinner I need to know by the end of Sept. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now