Eric W Posted June 3, 2015 Share Posted June 3, 2015 I tried searching on this and couldn't find anything. If someone has '50, '51, '52 56R or 76R and could run a tape measure across the front seat, I'd appreciate it. I have a lead on a seat for my 76R, but I don't know if it's the right one. Seller says it came out of a '52 56R, but it sounded like it wasn't bolted down and may have been just loose in the car when he got it. Doesn't mean it's the wrong seat, but the loose seat in my 76R isn't the right one... Let me know what you're measuring - cushion only, cushion + the side trim pieces, a bare unupholstered spring/frame... I measured inside at the bottom of the doors in my car, and it looks like maybe 65" width or so in there, and quite a bit narrower at the tops of the doors. Thanks! Link to comment Share on other sites More sharing options...
g-g-g0 Posted June 4, 2015 Share Posted June 4, 2015 Eric I am measuring across the widest (front edge) of the cushion on my '52 76R and I am getting 59" give or take a bit. Hope that helps. Gary Link to comment Share on other sites More sharing options...
Eric W Posted June 4, 2015 Author Share Posted June 4, 2015 Thanks - sounds like I might have found the right seat. Seller is reporting 62" (as close as one can measure) across the outer trim covers (beyond the upholstered cushion). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now