Jolly_John Posted April 11, 2015 Share Posted April 11, 2015 I have several vintage, new-in-box king pin kits for 1934-1952 MOPAR. These are quality parts, made in the U.S.A. by McQuay-Norris. They fit most six cylinder models of the following cars:--1935 to 1939 Chrysler--1935 to 1935 DeSoto--1934 to 1952 Dodge--1934 to 1935 Dodge half-ton truck--1934 to 1952 PlymouthThe price per complete king pin kit is just $45, plus shipping. Thanks for looking1934 1935 1936 1937 1938 1939 1940 1941 1942 19461947 1948 1949 1950 1951 1952 Link to comment Share on other sites More sharing options...
Guest 33ChryslerRoyal8 Posted April 15, 2015 Share Posted April 15, 2015 I have a 33 Chrysler CT. Do you know if the 34 kits fit my car?Thanks.I have several vintage, new-in-box king pin kits for 1934-1952 MOPAR. These are quality parts, made in the U.S.A. by McQuay-Norris. They fit most six cylinder models of the following cars:--1935 to 1939 Chrysler--1935 to 1935 DeSoto--1934 to 1952 Dodge--1934 to 1935 Dodge half-ton truck--1934 to 1952 PlymouthThe price per complete king pin kit is just $45, plus shipping. Thanks for looking1934 1935 1936 1937 1938 1939 1940 1941 1942 19461947 1948 1949 1950 1951 1952 Link to comment Share on other sites More sharing options...
Jolly_John Posted April 16, 2015 Author Share Posted April 16, 2015 Hi. I don't believe the MOPAR king pin sets I have advertised fit the eight cylinder models....just the six cylinder cars. However, if you have the steering apart at some time, I'll be happy to compare the actual sizes of my king pin sets (pin length and diameter) with yours. John Link to comment Share on other sites More sharing options...
Jolly_John Posted February 6, 2016 Author Share Posted February 6, 2016 I still have one of these high quality, made in U.S.A. king pin sets available. Link to comment Share on other sites More sharing options...
Guest C6kiwi Posted October 14, 2016 Share Posted October 14, 2016 Hi, Do you have the last king pin set for 1935 Chrysler C6 available. I would like to purchase. Also I am searching for a Left Hand Steering Knuckle (see pix) support for the C6 I am restoring here in New Zealand. Only around 14 C6 model came here in 1935 so parts are scarce! A suggestions would be much appreciated. Link to comment Share on other sites More sharing options...
Jolly_John Posted October 15, 2016 Author Share Posted October 15, 2016 Hello C6kiwi. Thanks for checking in. I'll check my parts shelves, and let you know on the king pin set and the lower steering knuckle. Will send you a PM through the forum (the little white envelope at the top of the page). John Link to comment Share on other sites More sharing options...
Guest C6kiwi Posted October 15, 2016 Share Posted October 15, 2016 Hi Jolly_John. Thankyou for your reply to my post. I look forward to king pin set availability. Just to be sure that I have correctly explained. The Steering Knuckle Support that I am searching for is the black painted vertical suspension component in the picture which runs from the upper "A" arm (in this case the shock absorber) down to the lower "A" arm. It is not normally a wearing part but at some time in the cars history the lower pin (the unpainted threaded part at bottom of pic) has come loose in the Steering Knuckle Support and has badly worn the threaded hole in the Steering Knuckle Support. I suspect the only source would be from a dismantled C6 or C7 Chrysler. Any leads on the whereabouts of a parted out 1935 Chrysler C6 or C7 would be appreciated. Regards C6 Kiwi Link to comment Share on other sites More sharing options...
TomP Posted October 16, 2016 Share Posted October 16, 2016 (edited) Hi John, looking for 1934 PE Lower Control Arm Pins and Bushes 4 sets, these go on the inner ends of the bottom wishbones Detail 60 in parts book front threaded pin #620781 2 off, rear threaded pin #627439 2 off. Detail 61 in parts book threaded bush #620782 4 off. Many thanks Tom Edited October 17, 2016 by TomP Image added (see edit history) Link to comment Share on other sites More sharing options...
Jolly_John Posted October 18, 2016 Author Share Posted October 18, 2016 Hi, Tom, and hello again C6kiwi. I have sent PM's to each of you. Thanks. John Link to comment Share on other sites More sharing options...
rtjavelin Posted December 7, 2016 Share Posted December 7, 2016 Hi John I need a set for my 37 dodge d5 coupe .how would you like to receive payment, plus shipping costs. I live in Vesper , Wisconsin, 54489 thanks Rob Link to comment Share on other sites More sharing options...
Jolly_John Posted December 7, 2016 Author Share Posted December 7, 2016 (edited) The D5 coupe is a really cute car, Rob. Congratulations! I don't have any king pin sets left for your Dodge, but I have a lot of other things for the '37. I sent you a PM. John in Plover (almost your neighbor!) Edited December 7, 2016 by Jolly_John (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now