alini Posted March 20, 2015 Share Posted March 20, 2015 Im about to order my replacement headliner from Clarks. I have the support rods and I have the plastic clips that held the headliner up around the door frame. I Dont have any pictures. Looking at the headliner before I took it apart escaped me. Anyone got good shots of the headliner install process? Link to comment Share on other sites More sharing options...
RivNut Posted March 20, 2015 Share Posted March 20, 2015 The body manual covers headliner installation in Section 6 of the Riviera section.Ed Link to comment Share on other sites More sharing options...
alini Posted March 20, 2015 Author Share Posted March 20, 2015 Thanks Ed, its section 3G in my 65 body book. But you reminded me I have them Link to comment Share on other sites More sharing options...
60FlatTop Posted March 20, 2015 Share Posted March 20, 2015 The plastic clip may be brittle and can split in the channel. Mine did. After it split I split it into 4" sections and there was enough to do a good job.Bernie Link to comment Share on other sites More sharing options...
alini Posted March 24, 2015 Author Share Posted March 24, 2015 So I pulled the old headliner out of storage and refocused myself on the orientation of the trim pieces. My old headliner is so dry rotted it falls apart as I handle it. I think I ended up tossing a section from the rear. I have 6 rods. One is really thin and alot more flexible than the other 5. The other five are still in their pockets so I know they are in order. The thin one I dont have a pocket with the remaining headliner. I am assuming it goes in the back? the book shows 6 rods, but doesnt call it out in any order. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now