Guest zman57 Posted March 1, 2015 Share Posted March 1, 2015 Greetings All,Looking for help from the vast expertise within this forum to identify the engine in the attached pics, which was originally thought to be a Maxwell.Before I acquired the engine it had been used some years ago as a stationary engine to run a generator on a farm.It would appear very similar to early Chrysler family engines, but the engine number does not have an alpha prefix and it is 441290.I have more pics if require additional detail.Many Thanks in anticipation. Link to comment Share on other sites More sharing options...
61polara Posted March 1, 2015 Share Posted March 1, 2015 It appears to be a 1923 Maxwell. Maxwell serial numbers for that year were 388530-444231. Your engine has a oil bath cone clutch with the filler in the rear clutch housing mount (seen in picture 1) which Maxwell used and the remaining blue/green paint is correct for Maxwell. Link to comment Share on other sites More sharing options...
Guest zman57 Posted March 1, 2015 Share Posted March 1, 2015 Thanks for your response Dave, My experience is limited to post 50's vehicles so I am kinda lost with this one. 1923 Maxwell would certainly be in line with a partial Maxwell dash fascia and amperes gauge that came with the engine that I managed to date from 22 to 24. I did look at some 20 - 24 Maxwell engines online to try and match but I notice that they had a different top hose outlet cast into head where this one is very similar to the Chrysler that succeeded the Good Maxwell engine with a 'bolt on' housing. Cheers,Martin. Link to comment Share on other sites More sharing options...
Rusty_OToole Posted March 1, 2015 Share Posted March 1, 2015 (edited) Could someone have replaced the head with a newer one? Edited March 1, 2015 by Rusty_OToole (see edit history) Link to comment Share on other sites More sharing options...
Guest zman57 Posted March 2, 2015 Share Posted March 2, 2015 I suppose it is possible as I don't know the history but it would depend on compatibility of the redesigned Chrysler Four or Plymouth engines.Being in Australia, I wouldn't of thought there would be the availibilty of parts for these or similar models particularly in rural areas back then, buy hey it's not out of the question. Hopefully some of the Maxwell / Chrysler guru's in this forum will be able to shed some light on it? Thanks. Link to comment Share on other sites More sharing options...
Rusty_OToole Posted March 2, 2015 Share Posted March 2, 2015 I'm no expert but I believe the first Chrysler four cylinder models were revised Maxwells. In that case it would not be surprising if a Chrysler head fit a Maxwell. It also would not surprise me if a Chrysler head were substituted for the original at some time, at least it is a possibility. Another possibility is that a late model Maxwell had the revised head.It is when parts are hard to get, that substitutions are most common. Link to comment Share on other sites More sharing options...
Guest zman57 Posted March 2, 2015 Share Posted March 2, 2015 Yes the Maxwell was the forerunner to the Chrysler but I checked pics the last of the Maxwell engines 1925 (Good Maxwell's) and they dont have the seperate housing. But the Chyrsler series 58,50 & 52 (1926 thu 28) and the Plymouth Q does. Do you think I should post this to the Maxwell forum? if I knew how? Link to comment Share on other sites More sharing options...
Guest zman57 Posted March 2, 2015 Share Posted March 2, 2015 Maybe the head casting number will help narrow it down? Link to comment Share on other sites More sharing options...
Guest zman57 Posted March 2, 2015 Share Posted March 2, 2015 I was advised by another member of the forum that those series of numbers are body numbers not engine numbers and Maxwell engine numbers start with a 'C'.To be continued.... Link to comment Share on other sites More sharing options...
Chrycoman Posted March 7, 2015 Share Posted March 7, 2015 41070 is the casting / part number for the cylinder head for used on Chrysler model I (1927 Chrysler 50) and model I* (1928 Chrysler 52) up to serial number HR-686-E. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now