Roger Barrett Posted October 12, 2014 Share Posted October 12, 2014 We just brought in a 27/29. Nevada desert survivor, rough. Could be restored with unlimited time and money resources. I will probably have to break it up and save a few goodies, but I hate to do that to such a rare model. We have not dug out all the parts stuffed into the body but it looks pretty complete. Not run since 1939. I would just about give this thing to anyone who wants to save it. If I have to cut it up there are good parts to help other Buicks survive. Any interest? Please let us know. Roger Link to comment Share on other sites More sharing options...
hidden_hunter Posted October 12, 2014 Share Posted October 12, 2014 got any pictures? it would be a shame though Link to comment Share on other sites More sharing options...
Roger Barrett Posted October 12, 2014 Author Share Posted October 12, 2014 We will get some pics after we get it after out all of the parts stuffed inside and seewhat's there.roger Link to comment Share on other sites More sharing options...
AzBob Posted October 12, 2014 Share Posted October 12, 2014 I would possibly be interested in spare engine parts etc. Link to comment Share on other sites More sharing options...
Roger Barrett Posted October 12, 2014 Author Share Posted October 12, 2014 What kind of parts do you need? We have quite a bit of stuff besides the recent arrival.Roger Link to comment Share on other sites More sharing options...
AzBob Posted October 13, 2014 Share Posted October 13, 2014 Roger, I am specifically looking for a Marvel heat riser that is not cracked like mine. As well as a wheel bolt and wedge.Bob Link to comment Share on other sites More sharing options...
hidden_hunter Posted October 13, 2014 Share Posted October 13, 2014 I'd potentially be interested in the distributor (+ cap and rotor if serviceable) Link to comment Share on other sites More sharing options...
Roger Barrett Posted October 15, 2014 Author Share Posted October 15, 2014 We got the car disgorged today. Sure enough, most of the missing stuff was in there, including the landau irons from behind the rear window. Most of the engine parts were in the rear seat area. Found the headlight bar but not the lights themselves. Too bad, because they had the rare nickel trim bands. Also the dash clock is missing. The odometer shows just over 11000 miles.AzBob, the heat riser was there and not cracked. Will need some TLC. We will have to carefully remove it from the manifold and the throttle shaft is locked up. Wheel hardware we can also help with.H.H. from Melbourne, we have a couple of distributors. One came with the recent arrival, looks like it will work. I have another that we took off a running 1926 sedan we converted to a 1928 distributor. The problem is it is seized in the generator rear casting. This is not unusual. I may cut the iron casting away from the distrib to save it. We have converted a lot of these cars to the 1928 distributor because they are made of iron so are not prone to the problems the pot metal ones have. Also, the points, rotors, caps, and parts are easy to get and cheap. These distributors come up for sale on eBay and swap meets. If you want the correct pot metal 1927 unit I think we can help.Anyone interested email me at bcanumber99@yahoo.com or call me at 530 863 seven five seven nine.Roger & Erik Link to comment Share on other sites More sharing options...
hidden_hunter Posted October 16, 2014 Share Posted October 16, 2014 We got the car disgorged today. Sure enough, most of the missing stuff was in there, including the landau irons from behind the rear window. Most of the engine parts were in the rear seat area. Found the headlight bar but not the lights themselves. Too bad, because they had the rare nickel trim bands. Also the dash clock is missing. The odometer shows just over 11000 miles.AzBob, the heat riser was there and not cracked. Will need some TLC. We will have to carefully remove it from the manifold and the throttle shaft is locked up. Wheel hardware we can also help with.H.H. from Melbourne, we have a couple of distributors. One came with the recent arrival, looks like it will work. I have another that we took off a running 1926 sedan we converted to a 1928 distributor. The problem is it is seized in the generator rear casting. This is not unusual. I may cut the iron casting away from the distrib to save it. We have converted a lot of these cars to the 1928 distributor because they are made of iron so are not prone to the problems the pot metal ones have. Also, the points, rotors, caps, and parts are easy to get and cheap. These distributors come up for sale on eBay and swap meets. If you want the correct pot metal 1927 unit I think we can help.Anyone interested email me at bcanumber99@yahoo.com or call me at 530 863 seven five seven nine.Roger & ErikIs there any difference between the various years asides from outer casing? I'd probably be looking for a complete unit as the rotor/caps if available, as it can take a while between them coming up here in Aus Link to comment Share on other sites More sharing options...
Roger Barrett Posted October 16, 2014 Author Share Posted October 16, 2014 The 26 and 27 are the same, pot metal case and carbon brush type rotor. 28 is all different with cast iron case, more modern style points and air gap rotor. I think the same unit was used in 29. At some time they went to dual points around then. For 26/27 I have caps and rotors and I think I can assemble a complete serviceable unit. 28 I am out of. I will seewhat's we can do, stay tuned for details.regards, Roger and Erik Link to comment Share on other sites More sharing options...
hidden_hunter Posted October 16, 2014 Share Posted October 16, 2014 The 26 and 27 are the same, pot metal case and carbon brush type rotor. 28 is all different with cast iron case, more modern style points and air gap rotor. I think the same unit was used in 29. At some time they went to dual points around then. For 26/27 I have caps and rotors and I think I can assemble a complete serviceable unit. 28 I am out of. I will seewhat's we can do, stay tuned for details.regards, Roger and ErikThanks mate, I would be more interested in a 26/27 - if you had a 28 as well I'd consider picking it up as a spare just in case as well Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now